Xwrt-Vortex Firmware 380.62 pour Huawei WS880
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: WS880_380.62_0.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Xwrt-Vortex is a port of Asuswrt-Merlin for different routers developed by Vortex. Xwrt-Vortex retains all the features of the original stock Asus firmware.
Installation:
Simply flash it like any regular update. Vous ne devriez pas avoir besoin de réinitialiser les paramètres d’usine. You can revert back to an original Asus firmware at any time just by flashing a firmware downloaded from Asus’s website.
REMARQUE:
resetting to factory default after flashing is strongly recommended for the following cases:
– Updating from a firmware version that is more than 3 releases older
– Switching from a Tomato/DD-WRT/OpenWRT firmware
If upgrading from anything older and you experience issues, then consider doing a factory default reset then as well. Always read the changelog, as mandatory resets will be mentioned there when they are necessary.
In all of these cases, do NOT load a saved copy of your settings! This would be the same thing as NOT resetting at all, as you will simply re-enter any invalid setting you wanted to get rid of. Make sure to create a new backup of your settings after reconfiguring.
Changements:
– NEW: Added nano 2.7.0 (user-friendly text editor). Note that for space reasons, some of its features are disabled for the RT-N66U and RT-AC66U. Entware users might want to uninstall the Entware version if they had it installed and want to use the built-in version instead.
– NEW: Option to toggle the display of passwords on the PPTPD and OpenVPN server pages.
– NEW: Allow providing a vendor class on the WAN page (DHCP option 60)
– NEW: Add option to disable sending a RELEASE request when odhcp6c exits, allowing you to retain your received prefix with some ISPs.
– CHANGED: Updated nettle to 3.2 (used for dnssec) and increased optimization level.
– CHANGED: Updated minidlna to 1.1.6
– CHANGED: Updated OpenVPN to 2.3.12
– CHANGED: Updated OpenSSL to 1.0.2i
– CHANGED: Revamped the Wireless Log page: Merged some columns to gain more horizontal space, Longer hostname shown (truncated names are now shown in a tooltip), Display clients’ IPv6 if they have one
– CHANGED: Accept up to 250 characters for OpenVPN client’s username and password (one provider needs 64).
– CHANGED: Hide the WPA key on the Wireless config page, and only reveal it when you click on the field to edit it.
– FIXED: OpenVPN client shouldn’t display policy routing settings when using a TAP interface.
– FIXED: DSL/ATM overhead setting was visible on MIPS models, which don’t support it.
– FIXED: Editing OpenVPN or PPTP users with any value larger than 32 chars could lead to corruption of the user list.
– FIXED: Custom config file for igmpproxy wasn’t working.
– FIXED: After turning off a Guest network, the next visit to the Wireless Settings page would show that guest network’s settings instead of the parent band settings (Asus bug)
– FIXED: Smart Connect rules didn’t apply on the RT-AC88U (backported fix from 380_3941).
– FIXED: Numerous memory leaks in the networkmap service. (Asus bug)
– FIXED: Potential buffer overrun in the networkmap service. (Asus bug)
– FIXED: Broken IPv6 connectivity if enabling SSH brute force protection (only MIPS models were affected)
– FIXED: DHCP lease renewals would fail with ISPs with a broken DHCP server that sent replies from a different IP address.
– FIXED: 5G LED would fail to turn back on when exiting stealth mode.
– FIXED: Only hostname was used as remote server in an exported OpenVPN client config when using Namecheap DDNS.
– FIXED: Security vulnerability (XSS/CSR) in httpd (backported fix from 380_4005).
– FIXED: Chrome would try to auto fill some fields (such as on the DDNS configuration page), which could be problematic.
– FIXED: IPTraffic database was no longer properly named after the router’s MAC address on the AC88/AC3100/AC5300. If you recently enabled it, you will need to either re-create a new database, or rename the existing database from tomato_cstats_000000000000.gz to tomato_cstats_XXXXXXXXXXXX.gz, where “XXXXXXXXXXXX” is your MAC as found with “nvram get et2macaddr”, in lowercase (AC88/AC3100/AC5300 only). Regular traffic monitoring (stored in tomato_rstats_XXXXXXXXXXXX.gz) is fine.
Notes d’installation:
– Ce firmware personnalisé peut être appliqué comme toute mise à jour normale.
– Vous ne devriez pas avoir besoin de réinitialiser les paramètres d’usine.
– Vous pouvez à tout moment revenir à un microprogramme d’origine ASUS.
– Ne chargez pas de copie enregistrée de vos paramètres.
Télécharger