D-Link DNS-323 Rev.A1B1C1 NAS Alt-F Firmware 0.1 RC4.1
Tipo di file: Firmware.
Sistema Operativo: AnyOS.
Nome del file: Alt-F-0.1RC4.1-DNS-323-rev-A1B1C1.bin.
Bit: 32/64 Bit.
Licenza: Gratis.
Descrizione
This is mainly a maintenance release, with all fixes for the RC4 applied and with some other minor fixes and improvements. All users are encouraged to upgrade.
The DNS-320L/LW-rev-Ax and the DNS-320-rev-Bx support is now complete. The circuit boards for the DNS-320L-rev-Ax and DNS-320-rev-Bx are identical apart from a smaller amount of memory in the DNS-320-rev-Bx, so any of them can use the other firmware.
If you are running the vendor’s firmware you don’t have to follow the bellow described procedure. If however you have flashed 0.1RC4 or the experimental releases and applied any fix or patch, you have to manually removed them before upgrading.
In the future this will happens automatically when upgrading, but for now you have to save and execute a file in the box. Rolling fixes back might not work as expected. You also have to disable the “boot user script” if you are using it to apply any fix or patch to the DNS-320-rev-Bx or to the 320L/LW-rev-Ax boxes.
Create a file with the text between the two ‘———–‘ lines below, being sure that #!/bin/sh is at the file first line and column. Then telnet or ssh the box and login as the ‘root’ user using the same password as in the webUI and execute it by typing in the command line:
dos2unix /path/to/saved/file
sh /path/to/saved/file
NOTA:
– Reboot the box before performing any upgrade.
– Save current settings to a desktop computer (System->Settings, in the
“Computer Disk” section, “Save current settings to file” hit the Download button)
– Look at the box bottom attached label to see its hardware revision level, then select the appropriate Alt-F-0.1RC5 bin file and use the normal firmware upgrade method to flash it.
For example, the Alt-F-0.1RC5-DNS-320-rev-Ax.bin file is to be used on the DNS-320 on any rev-A1, A2 or A3 box. Don’t try to flash firmware if your box is not supported.
About Network-Attached Storage Updates:
L’aggiornamento del firmware NAS (Network-Attached Storage) può migliorare le prestazioni, la stabilità e la sicurezza complessive del sistema aggiungendo varie correzioni per problemi correlati, migliorando le funzionalità esistenti (o aggiungendo il supporto per nuove) o aggiornamento di diverse applicazioni.
A causa dell’elevato numero di produttori di NAS, così come dei tipi di archiviazione di rete, l’installazione di un nuovo firmware potrebbe non essere sempre così semplice come sembra, e nemmeno troppo sicura. La mancata esecuzione di un aggiornamento software può causare seri malfunzionamenti alla memoria di rete.
Quindi, prima ancora di prendere in considerazione l’applicazione di questa versione, leggi attentamente la guida all’installazione e avvia il processo solo dopo aver compreso e familiarizzato completamente con tutti i passaggi.
Inoltre, sarebbe meglio se si prendesse in considerazione l’uso di un’unità UPS (Uninterruptible Power Supply) per eseguire questa operazione, poiché nessuna interruzione dell’alimentazione dovrebbe influire sull’aggiornamento.
Tenendo conto di tutti questi aspetti, dopo aver letto la guida all’installazione, fare clic sul pulsante di download per applicare questa versione del firmware al NAS. Ricordati di ricontrollare con il nostro sito Web per essere sempre aggiornato sulle ultime versioni.
Download