D-Link DNS-323 Rev.A1B1C1 NAS Alt-F Firmware 0.1 RC4.1
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: Alt-F-0.1RC4.1-DNS-323-rev-A1B1C1.bin.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
This is mainly a maintenance release, with all fixes for the RC4 applied and with some other minor fixes and improvements. All users are encouraged to upgrade.
The DNS-320L/LW-rev-Ax and the DNS-320-rev-Bx support is now complete. The circuit boards for the DNS-320L-rev-Ax and DNS-320-rev-Bx are identical apart from a smaller amount of memory in the DNS-320-rev-Bx, so any of them can use the other firmware.
If you are running the vendor’s firmware you don’t have to follow the bellow described procedure. If however you have flashed 0.1RC4 or the experimental releases and applied any fix or patch, you have to manually removed them before upgrading.
In the future this will happens automatically when upgrading, but for now you have to save and execute a file in the box. Rolling fixes back might not work as expected. You also have to disable the «boot user script» if you are using it to apply any fix or patch to the DNS-320-rev-Bx or to the 320L/LW-rev-Ax boxes.
Create a file with the text between the two ‘———–‘ lines below, being sure that #!/bin/sh is at the file first line and column. Then telnet or ssh the box and login as the ‘root’ user using the same password as in the webUI and execute it by typing in the command line:
dos2unix /path/to/saved/file
sh /path/to/saved/file
NOTA:
– Reboot the box before performing any upgrade.
– Save current settings to a desktop computer (System->Settings, in the
«Computer Disk» section, «Save current settings to file» hit the Download button)
– Look at the box bottom attached label to see its hardware revision level, then select the appropriate Alt-F-0.1RC5 bin file and use the normal firmware upgrade method to flash it.
For example, the Alt-F-0.1RC5-DNS-320-rev-Ax.bin file is to be used on the DNS-320 on any rev-A1, A2 or A3 box. Don’t try to flash firmware if your box is not supported.
About Network-Attached Storage Updates:
La actualización del firmware del almacenamiento conectado a la red (NAS) puede mejorar el rendimiento general, la estabilidad y la seguridad del sistema al agregar varias correcciones para problemas relacionados, mejorar las funciones existentes (o agregar soporte para las nuevas), o Actualizando diferentes aplicaciones.
Debido a la gran cantidad de fabricantes de NAS, así como a los tipos de almacenamiento en red, la instalación de un nuevo firmware puede no ser siempre tan fácil como parece, y tampoco es demasiado segura. No realizar una actualización de software puede causar un mal funcionamiento grave del almacenamiento de red.
Así que, antes de considerar la aplicación de esta versión, lea atentamente la guía de instalación e inicie el proceso solo cuando haya comprendido y se haya familiarizado por completo con todos los pasos.
Además, sería mejor si tuviera en cuenta el uso de una unidad UPS (fuente de alimentación ininterrumpida) para realizar esta tarea, ya que la interrupción de la alimentación no debería afectar la actualización.
Teniendo en cuenta todos estos aspectos, después de haber leído la guía de instalación, haga clic en el botón de descarga para aplicar esta versión de firmware a su NAS. Recuerde consultar con nuestro sitio web para estar al día con los últimos lanzamientos.
Descargar