Swann NVR8-7285 Firmware GA3.1
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: NVR8-7x85_0811_GA3.1.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Firmware Release:
This version addresses some minor issues and also includes the previous update that enabled dual-recording to improve playback compatibility on mobile phones.
This release increases the camera compatibility to include selected 1080P cameras (NHD-810 Bullet, NHD-811 Dome, NHD-817PTZ). Playback compatibility with the phone apps is increased with recording now enabled for the internet stream to enable smooth playback over normal internet connections.
Check the attachments here and have a look at the file « Firmware_update_not_needed.png ». If your NVR system information screen already shows a version ending in « GA 3.1 » as in this image, you are already up to date and you don’t have to worry about applying the update noted below.
Also included is Swann’s first automatic update system. As new firmwares will become available you will be notified via the on-screen display on the recorder or a push message on the SwannView Link app. Downloading and updating can be accomplished directly from the recorder or app just by clicking on the notification and accepting the new update.
Please note we have combined the firmware for these models so that you can use the attached NVR8 file for both NVR8-7085 and NVR8-7285 models and also the NVR4 file for both NVR4-7085 and NVR4-7285 models.
NB: After updating to this firmware you MUST format your NVR’s Hard Disk to enable the new recording format. Failure to do this will prevent the NVR from recording anything from your cameras.
Upgrading the NVR’s Firmware:
1. After downloading the relevant firmware for your NVR, go to your downloads folder to access the file.
2. As the firmware is zipped, you need to extract it first. Before doing that, connect your flash drive to a spare USB port on your computer.
3. For Windows 7 users, do the following – Right-click the file then click “Extract All”. Select your flash drive to extract to then click “Extract”. For Windows 8, Windows 10 and Mac OS X users, do the following – Double-click the file to open it then drag the file to your flash drive.
4. Insert your flash drive to the NVR’s USB port.
5. In Live View mode, right-click the mouse then click “Menu”.
6. Click “System” then “Maintenance”
7. Click “Upgrade” then select the firmware file. Click “Upgrade” then click “OK” to confirm. 8. An hourglass will appear on-screen. When the firmware upgrade has completed, the NVR will reboot automatically.
9. Complete the Setup Wizard as per the quick start guide included with your NVR. Remove your flash drive from the USB port. 10. To support the new remote playback feature, you must format the hard drive (all video events will be removed). In Live View mode, rightclick the mouse to access the Menu Bar then click “Menu”. Click “Device” then click the checkbox next to the hard drive. Click the “Init” button to format the drive then click “OK” to confirm. The hard drive will now format (an hourglass will appear on-screen). When finished, right-click the mouse to exit.
Télécharger