Point Grey Grasshopper3 USB3 Vision Camera Firmware 2.8.3.0
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: GS3-U3-2.08.3-00.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Corrections:
Enhancements:
30542 – Feature Request: PGR HDR mode for GS3-U3-23S6
26756 – Event notification support for Start/Stop Acquisition, ExposureEnd
Resolved Issues:
31088 – Pin state does not show up in embedded information
30281 – The max image size does not change back to original when switching video modes
29410 – GS3-U3-23S6M IMX174 – need to reduce packet size to reach max shutter time
ERRATA LIST (list of known issues with this version):
27560 – first ROI image corrupted in trigger modes
27482 – NI-Max Error 0xBFF6901B Timeout
23973 – Top row is darker than neighbors
Firmware update:
1. Install FlyCapture2 for either windows or linux.
2. Plug your camera(s) in. Cameras must show up in FlyCapture2. If they do not show up, install FlyCapture2.X and the associated drivers (if applicable) and ensure cameras are visible in FlyCap2 demo.
3. Run UpdatorGUI2.exe or UpdatorGUI3.exe (depending on version of FlyCapture2.X) installed in your bin/bin64 folder:
On 32 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin
On 64 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin64
4. Select the camera(s) to update, point to the .ezm2 file downloaded with this package, and select « Update ».
Camera(s) should now be updated. Please note a power cycle of the cameras should not be required, as they are automatically rebooted after firmware update.
Télécharger