Panasonic WV-SW397A Network Camera Firmware 2.40
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: sw397_240E_cam_107.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Issue (Phenomenon):
1. Changed factory default setting value at User Authentication from
« OFF » to « ON ».
2. Deleted pre-registered User name (admin), and Password (12345).
3. All users must register User name(s) and Password(s) at initial
access.
– User name: 1 to 32 characters
– Password; 8 to 32 characters, two or more types of characters
among alphabets, numbers and symbols.
Remarque:
– Currently registered User name(s) and Password(s) will NOT be deleted by upgrading firmware, however, you have to register them under the new policy (above « 3 ») after initializing (default reset) by the INITIAL SET button or by the setup menu
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
Télécharger