Panasonic WV-SW397A Network Camera Firmware 2.40
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: sw397_240E_cam_107.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Issue (Phenomenon):
1. Changed factory default setting value at User Authentication from
„OFF“ to „ON“.
2. Deleted pre-registered User name (admin), and Password (12345).
3. All users must register User name(s) and Password(s) at initial
access.
– User name: 1 to 32 characters
– Password; 8 to 32 characters, two or more types of characters
among alphabets, numbers and symbols.
Hinweis:
– Currently registered User name(s) and Password(s) will NOT be deleted by upgrading firmware, however, you have to register them under the new policy (above „3“) after initializing (default reset) by the INITIAL SET button or by the setup menu
Updating a camera’s firmware
– Download the latest firmware file and save it on your PC.
– Click the [Maintenance] tab.
– On the left side of the screen under [Maintenance], click [Update Firmware].
– Click [Update Firmware]. The camera will automatically restart.
– After the camera restarts, a dialog prompts you to select the firmware file.
– Click [Browse…]. A dialog prompts you to specify the location of the firmware file.
– Select the firmware file you downloaded from the Panasonic Network Camera website and click [Open]. The selected file name is displayed.
– Confirm the file name, then click [Update Firmware].
– The [Updating firmware.] screen is displayed, and then the [Restarting now…] screen is displayed.
– When the firmware update is complete, the camera’s top page is displayed.
– You can confirm the camera’s firmware version on the top page.
– Confirm the camera’s new firmware version on the top page.
– Do not turn off the power during a firmware update.
– All images buffered in the internal memory are deleted when the firmware is updated.
– All alarm logs are deleted when the firmware is updated.
– You can also use the Setup Program to update the camera’s firmware.
– The camera’s current firmware version can be confirmed on the [Top] page and the [Status] page.
– It might take ten minutes or more to update the firmware according to the network conditions.
Download