NETGEAR R7000 Router Firmware 1.0.11.110
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: R7000-V1.0.11.110_10.2.100.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Security Corrections:
– Fixes security issues.
Firmware Installation:
Write down all the settings which you changed from the default values, since you may need to re-enter them manually.
– Téléchargez le firmware and save it to a convenient place such as your desktop. Unzip if needed.
– Log in to the router using a Web browser.
– Click ADVANCED tab Administration Firmware Upgrade.
– Click Browse and find the file you just downloaded.
– Click Upload. Do not interrupt the upgrade while the router does this step.
Note:
To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.
Note importante:
– The upgrade process is completed when the on screen progress bar completes. If power LED light turns amber and blinking, power cycle the router to complete the upgrade.
– If the upgrade progress bar on web GUI doesn’t display correctly during firmware upgrade, you can still check the status using Power LED. The Power LED should be blinking (amber) during firmware upgrade. After firmware upgrade is done and boots up the system, it changes to steady amber color.
– Please DO NOT power off or reboot the device during firmware upgrade, otherwise, it may result to a corrupt firmware and cause the device not to work.
Télécharger