MikroTik RouterOS PPC Firmware 6.48 RC 40
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: routeros-powerpc-6.48beta40.npk.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
What’s new in 6.48beta40:
– arm64 – improved reboot reason reporting in log;
– bridge – added minor fixes and improvements for IGMP snooping with HW offloading;
– bridge – fixed link-local multicast forwarding when IGMP snooping and HW offloading is enabled;
– bridge – fixed MDB entry removal when using bridge port « fast-leave » property;
– conntrack – automatically reduce connection tracking timeouts when table is full;
– console – allow « once » parameter for bonding monitoring;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – added switch-cpu port VLAN filtering (switch-cpu port is now mapped with bridge interface VLAN membership when vlan-filtering is enabled);
– crs3xx – fixed IGMP snooping for CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed switch « copy-to-cpu » property for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
– detnet – fixed malformed dummy DHCP User Class option;
– detnet – use MAC address from bridge interface instead of slave port;
– dhcpv4-server – improved « client-id » value parsing;
– ipsec – refresh peer’s DNS only when phase 1 is down;
– leds – fixed LED type setting;
– smb – fixed possible memory leak;
– sms – fixed SMS sending when both « interface » and « smsc » parameters are specified;
– snmp – added information from IPsec « active-peers » menu to MIKROTIK-MIB;
– snmp – fixed « /tool snmp-get » functionality (introduced in v 6.46beta43);
– snmp – fixed value types for « dot1qPvid »;
– supout – added bonding interface monitor information;
– switch – fixed Ethernet padding for small packets;
– tr069-client – allow passing LTE firmware update URL as XML;
– user-manager – do not allow creating limitation that crosses midnight;
– user-manager – updated PayPal’s root certificate authorities;
– wireless – improved WPS process stability;
Other changes since v6.47.3:
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
– bonding – added LACP monitoring (CLI only);
– bonding – removed « sys-id » and « sys-priority » from monitor-slaves command;
– bridge – added warning message when port is disabled by the BPDU guard;
– bridge – allow to exclude interfaces from extended ports (CLI only);
– bridge – correctly remove dynamic VLAN assignment for bridge ports;
– bridge – fixed BPDU guard port disable/enable on HW offloaded interfaces;
– bridge – fixed dynamic VLAN assignment when changing port « frame-type » property (introduced in v6.46);
– bridge – fixed dynamic VLAN assignment when changing port to tagged VLAN member;
– bridge – fixed local MAC address removal from host table when deleting bridge interface;
– bridge – fixed multicast table printing;
– bridge – fixed packet forwarding for CAP and BCP controlled interfaces (introduced in v6.48beta12);
– bridge – fixed STP alternate and backup port states for devices with switch chip (introduced in v6.47);
– bridge – improved BPDU guard logging;
– bridge – increased multicast table size to 4K entries;
– bridge – show error when switch do not support controlling bridge or port extension (CLI only);
– bridge – show « H » flag for extended bridge ports;
– certificate – clear challenge password on renew;
– chr – improved interface loading on startup on XEN;
– chr – improved system stability when changing flow control settings on e1000;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – fixed « custom-drop-packet » and « not-learned » switch stats for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed duplicate host entries when creating static switch hosts;
– crs3xx – fixed « mirror-source » property on switch port disable for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed port isolation for « switch-cpu » port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed port isolation removal for « switch-cpu » port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed « storm-rate » traffic limiting for switch-cpu port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed switch « not-learned » stats for CRS305, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, CRS318 devices;
– crs3xx – fixed switch port « egress-rate » removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed VLAN tagged packet forwarding on « switch-cpu » port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices (introduced in v6.48beta12);
– defconf – improved CAP interface bridging;
– defconf – improved default configuration generation on devices with non-default wireless interface names;
– defconf – improved default configuration generation on devices without wireless package installed;
– dhcpv6-server – added ability to generate binding on first request;
– discovery – added « lldp-med-net-policy-vlan » property for assigning VLAN ID (CLI only);
– discovery – allow choosing which discovery protocol is used (CLI only);
– discovery – fixed discovery on mesh ports;
– discovery – fixed discovery packet sending on newly bridged port with « protocol-mode=none »;
– discovery – fixed discovery when enabled only on master port;
– discovery – send the same « Chassis ID » on all interfaces for LLDP packets;
– discovery – use interface MAC address when sending MNDP from slave port;
– dns – added IPv6 support for DoH;
– dns – do not use type « A » for static entries with unspecified type;
– dns – fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
– export – fixed RouterBOARD USB « type » parameter export;
– fetch – fixed « src-address » usage for SFTP;
– filesystem – fixed repartition on non-first partition;
– filesystem – fixed repartition on RB4011 series devices;
– filesystem – improved long-term filesystem stability and data integrity;
– gps – fixed « init-channel » release when not used;
– health – changed PSU state parameter type to read-only;
– health – removed unused « heater-control » and « heater-threshold » parameters;
– hotspot – added support for captive portal advertising using DHCP (RFC7710);
– hotspot – added « vlan-id » parameter support for hosts and HTML pages;
– hotspot – ignore packets from host while MAC authentication is in progress;
– hotspot – improved management service stability when receiving bogus packets;
– ike1 – allow using « my-id » parameter with XAuth;
– ike1 – fixed policy update with and without mode configuration;
– ike1 – rekey phase 1 as responder for Windows initiators;
– ike2 – added « prf-algorithm » support for phase 1;
– ike2 – improved child SA rekeying process;
– ipsec – added SHA384 hash algorithm support for phase 1 (CLI only);
– ipsec – do not kill connection when peer’s « name » or « comment » is changed;
– ipsec – fixed client certificate usage when certificate is renewed with SCEP;
– ipsec – fixed multiple warning message display for peers;
– ipsec – inactivate peer’s policy on disconnect;
– ipsec – refresh peer’s DNS only when phase 1 is down;
– kidcontrol – allow creating static device entries without assigned user;
– kidcontrol – fixed « time-unlimited-rate » to engage in correct time;
– lora – expose « joinEui » un « devEui » values in the log;
– lte – added « age » column and « max-age » parameter to « cell-monitor » (CLI only);
– lte – added « comment » parameter for APN profiles;
– lte – added support for Alcatel IK41VE1;
– ospf – optimized LSA printing for smaller message sizes;
– ppp – added « ipv6-routes » parameter to « secrets » menu;
– ppp – added support for « Framed-IPv6-Route » RADIUS attribute;
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– snmp – fixed value types for « dot1dStp »;
– ssh – fixed returned output saving to file when « output-to-file » parameter is used;
– ssh – skip interactive authentication when not running in interactive mode;
– system – replace « 3 » in superscript to « ^3 » on RBD53GR devices;
– tr069-client – added additional wireless registration table parameters;
– tr069-client – added LTE model and revision parameters;
– tr069-client – added wireless « noise-floor » and « overall-tx-ccq » information parameters;
– tr069-client – added « X_MIKROTIK_MimoRSRP » parameter for LTE RSRP value reporting;
– tr069-client – allow passing LTE firmware update URL as XML;
– tr069-client – send correct « ConnectionRequestURL » when using IPv6;
– traffic-flow – added NAT event logging support for IPFIX;
– traffic-flow – added « sys-init-time » parameter support;
– webfig – fixed default value presence when creating new entries under « IP->Kid Control »;
– winbox – allow performing « USB Power Reset » on « 0 » bus on RBM33G;
– winbox – fixed « IP->Kid Control->Devices » table automatic refreshing;
– winbox – fixed minor typo in « Users » menu;
– winbox – fixed « receive-errors » setting persistence under « Wireless/Wireless Sniffer/Settings » menu;
– winbox – fixed « tls-version » parameter setting under « IP/Services » menu;
– winbox – use health values reported by gauges for « System/Health » menu;
– wireless – added support for U-NII-2 for wAP ac;
– wireless – create « connect-list » rule when address specified for « setup-repeater »;
– wireless – updated « canada » regulatory domain information;
– wireless – updated « no_country_set » regulatory domain information;
– wireless – updated « united states » regulatory domain information;
Télécharger