MikroTik RouterOS PPC Firmware 6.48 RC 40
Tipo de archivo: Firmware.
Sistema Operativo: AnyOS.
Nombre del archivo: routeros-powerpc-6.48beta40.npk.
Bit: 32/64 Bit.
Licencia: Gratuito.
Descripción
What’s new in 6.48beta40:
– arm64 – improved reboot reason reporting in log;
– bridge – added minor fixes and improvements for IGMP snooping with HW offloading;
– bridge – fixed link-local multicast forwarding when IGMP snooping and HW offloading is enabled;
– bridge – fixed MDB entry removal when using bridge port «fast-leave» property;
– conntrack – automatically reduce connection tracking timeouts when table is full;
– console – allow «once» parameter for bonding monitoring;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – added switch-cpu port VLAN filtering (switch-cpu port is now mapped with bridge interface VLAN membership when vlan-filtering is enabled);
– crs3xx – fixed IGMP snooping for CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed switch «copy-to-cpu» property for CRS305, CRS318, CRS326-24G-2S+, CRS328 devices;
– detnet – fixed malformed dummy DHCP User Class option;
– detnet – use MAC address from bridge interface instead of slave port;
– dhcpv4-server – improved «client-id» value parsing;
– ipsec – refresh peer’s DNS only when phase 1 is down;
– leds – fixed LED type setting;
– smb – fixed possible memory leak;
– sms – fixed SMS sending when both «interface» and «smsc» parameters are specified;
– snmp – added information from IPsec «active-peers» menu to MIKROTIK-MIB;
– snmp – fixed «/tool snmp-get» functionality (introduced in v 6.46beta43);
– snmp – fixed value types for «dot1qPvid»;
– supout – added bonding interface monitor information;
– switch – fixed Ethernet padding for small packets;
– tr069-client – allow passing LTE firmware update URL as XML;
– user-manager – do not allow creating limitation that crosses midnight;
– user-manager – updated PayPal’s root certificate authorities;
– wireless – improved WPS process stability;
Other changes since v6.47.3:
– arm – added support for automatic CPU frequency stepping for IPQ4018/IPQ4019 devices;
– arm – improved watchdog and kernel panic reporting in log after reboots on IPQ4018/IPQ4019 devices;
– bonding – added LACP monitoring (CLI only);
– bonding – removed «sys-id» and «sys-priority» from monitor-slaves command;
– bridge – added warning message when port is disabled by the BPDU guard;
– bridge – allow to exclude interfaces from extended ports (CLI only);
– bridge – correctly remove dynamic VLAN assignment for bridge ports;
– bridge – fixed BPDU guard port disable/enable on HW offloaded interfaces;
– bridge – fixed dynamic VLAN assignment when changing port «frame-type» property (introduced in v6.46);
– bridge – fixed dynamic VLAN assignment when changing port to tagged VLAN member;
– bridge – fixed local MAC address removal from host table when deleting bridge interface;
– bridge – fixed multicast table printing;
– bridge – fixed packet forwarding for CAP and BCP controlled interfaces (introduced in v6.48beta12);
– bridge – fixed STP alternate and backup port states for devices with switch chip (introduced in v6.47);
– bridge – improved BPDU guard logging;
– bridge – increased multicast table size to 4K entries;
– bridge – show error when switch do not support controlling bridge or port extension (CLI only);
– bridge – show «H» flag for extended bridge ports;
– certificate – clear challenge password on renew;
– chr – improved interface loading on startup on XEN;
– chr – improved system stability when changing flow control settings on e1000;
– crs3xx – added initial Bridge Port Extender support (CLI only);
– crs3xx – added initial Controlling Bridge support for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (CLI only);
– crs3xx – fixed «custom-drop-packet» and «not-learned» switch stats for CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed duplicate host entries when creating static switch hosts;
– crs3xx – fixed «mirror-source» property on switch port disable for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed port isolation for «switch-cpu» port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed port isolation removal for «switch-cpu» port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed «storm-rate» traffic limiting for switch-cpu port on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed switch «not-learned» stats for CRS305, CRS326-24G-2S+, CRS328-24P-4S+, CRS328-4C-20S-4S+, CRS318 devices;
– crs3xx – fixed switch port «egress-rate» removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – fixed VLAN tagged packet forwarding on «switch-cpu» port for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices (introduced in v6.48beta12);
– defconf – improved CAP interface bridging;
– defconf – improved default configuration generation on devices with non-default wireless interface names;
– defconf – improved default configuration generation on devices without wireless package installed;
– dhcpv6-server – added ability to generate binding on first request;
– discovery – added «lldp-med-net-policy-vlan» property for assigning VLAN ID (CLI only);
– discovery – allow choosing which discovery protocol is used (CLI only);
– discovery – fixed discovery on mesh ports;
– discovery – fixed discovery packet sending on newly bridged port with «protocol-mode=none»;
– discovery – fixed discovery when enabled only on master port;
– discovery – send the same «Chassis ID» on all interfaces for LLDP packets;
– discovery – use interface MAC address when sending MNDP from slave port;
– dns – added IPv6 support for DoH;
– dns – do not use type «A» for static entries with unspecified type;
– dns – fixed listening for DNS queries when only dynamic static entries exist (introduced in v6.47);
– export – fixed RouterBOARD USB «type» parameter export;
– fetch – fixed «src-address» usage for SFTP;
– filesystem – fixed repartition on non-first partition;
– filesystem – fixed repartition on RB4011 series devices;
– filesystem – improved long-term filesystem stability and data integrity;
– gps – fixed «init-channel» release when not used;
– health – changed PSU state parameter type to read-only;
– health – removed unused «heater-control» and «heater-threshold» parameters;
– hotspot – added support for captive portal advertising using DHCP (RFC7710);
– hotspot – added «vlan-id» parameter support for hosts and HTML pages;
– hotspot – ignore packets from host while MAC authentication is in progress;
– hotspot – improved management service stability when receiving bogus packets;
– ike1 – allow using «my-id» parameter with XAuth;
– ike1 – fixed policy update with and without mode configuration;
– ike1 – rekey phase 1 as responder for Windows initiators;
– ike2 – added «prf-algorithm» support for phase 1;
– ike2 – improved child SA rekeying process;
– ipsec – added SHA384 hash algorithm support for phase 1 (CLI only);
– ipsec – do not kill connection when peer’s «name» or «comment» is changed;
– ipsec – fixed client certificate usage when certificate is renewed with SCEP;
– ipsec – fixed multiple warning message display for peers;
– ipsec – inactivate peer’s policy on disconnect;
– ipsec – refresh peer’s DNS only when phase 1 is down;
– kidcontrol – allow creating static device entries without assigned user;
– kidcontrol – fixed «time-unlimited-rate» to engage in correct time;
– lora – expose «joinEui» un «devEui» values in the log;
– lte – added «age» column and «max-age» parameter to «cell-monitor» (CLI only);
– lte – added «comment» parameter for APN profiles;
– lte – added support for Alcatel IK41VE1;
– ospf – optimized LSA printing for smaller message sizes;
– ppp – added «ipv6-routes» parameter to «secrets» menu;
– ppp – added support for «Framed-IPv6-Route» RADIUS attribute;
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– snmp – fixed value types for «dot1dStp»;
– ssh – fixed returned output saving to file when «output-to-file» parameter is used;
– ssh – skip interactive authentication when not running in interactive mode;
– system – replace «3» in superscript to «^3» on RBD53GR devices;
– tr069-client – added additional wireless registration table parameters;
– tr069-client – added LTE model and revision parameters;
– tr069-client – added wireless «noise-floor» and «overall-tx-ccq» information parameters;
– tr069-client – added «X_MIKROTIK_MimoRSRP» parameter for LTE RSRP value reporting;
– tr069-client – allow passing LTE firmware update URL as XML;
– tr069-client – send correct «ConnectionRequestURL» when using IPv6;
– traffic-flow – added NAT event logging support for IPFIX;
– traffic-flow – added «sys-init-time» parameter support;
– webfig – fixed default value presence when creating new entries under «IP->Kid Control»;
– winbox – allow performing «USB Power Reset» on «0» bus on RBM33G;
– winbox – fixed «IP->Kid Control->Devices» table automatic refreshing;
– winbox – fixed minor typo in «Users» menu;
– winbox – fixed «receive-errors» setting persistence under «Wireless/Wireless Sniffer/Settings» menu;
– winbox – fixed «tls-version» parameter setting under «IP/Services» menu;
– winbox – use health values reported by gauges for «System/Health» menu;
– wireless – added support for U-NII-2 for wAP ac;
– wireless – create «connect-list» rule when address specified for «setup-repeater»;
– wireless – updated «canada» regulatory domain information;
– wireless – updated «no_country_set» regulatory domain information;
– wireless – updated «united states» regulatory domain information;
Descargar