Gigabyte GA-X58A-UD7 (rev. 1.0) Marvell SATA3 Console Pilote 1.0.0.1027
Type de fichier: Pilote.
Système d’exploitation: Windows 7, Windows Vista, Windows XP.
Nom de fichier: motherboard_driver_marvell_console.exe.
Bit: 64 Bit.
Licence: Gratuit.
Description
CPU
1. Prise en charge d’un Intel Core i7 series processor in the LGA1366 package
2. L3 cache varies with CPU
QPI
1. 4.8GT/s, 6.4GT/s
Chipset
1. North Bridge: Intel X58 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
2. Dual/3 channel memory architecture
3. Prise en charge de DDR3 2200/1333/1066/800 MHz memory modules
4. Prise en charge de non-ECC memory modules
5. Prise en charge de Extreme Memory Profile (XMP) memory modules
Audio
1. Realtek ALC889 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Prise en charge de Dolby Home Theater
5. Prise en charge de S/PDIF In/Out
6. Prise en charge de CD In
LAN
1. 2 x RTL8111D chip (10/100/1000 Mbit)
2. Prise en charge de Teaming
3. Support Smart Dual LAN
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
2. 2 x PCI Express x16 slot, running at x8 (PCIEX8_1/PCIEX8_2)(The PCIEX16_1, PCIEX16_2, PCIEX8_1 and PCIEX8_2 slots conform to PCI Express 2.0 standard.)
3. 2 x PCI Express x1 slots
4. 1 x PCI slot
Multi-Graphics Technology
1. Prise en charge de 2-Way/3-Way ATI CrossFireX/NVIDIA SLI technology
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
2. Prise en charge de SATA RAID 0, RAID 1, RAID 5, and RAID 10
Marvell 9128 chip:
1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Prise en charge de SATA RAID 0, and RAID 1
GIGABYTE SATA2 chip:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 2 x SATA 3Gb/s connectors (GSATA2_8, GSATA2_9) supporting up to 2 SATA 3Gb/s devices
3. Prise en charge de SATA RAID 0, RAID 1, and JBOD
JMicron JMB362 chip:
1. 2 x eSATA 3Gb/s connectors (eSATA/USB Combo) on the back panel sup- porting up to 2 SATA 3Gb/s devices
2. Prise en charge de SATA RAID 0, RAID 1, and JBOD
iTE IT8720 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
Integrated in the South Bridge
1. Up to 10 USB 2.0/1.1 ports (6 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers)
NEC chip:
1. Up to 2 USB 3.0/2.0 ports on the back panel
IEEE 1394
1. T.I. TSB43AB23 chip
2. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 8 x SATA 3Gb/s connectors
6. 2 x SATA 6Gb/s connectors
7. 1 x CPU fan header
8. 3 x system fan headers
9. 1 x power fan header
10. 1 x North Bridge fan header
11. 1 x front panel header
12. 1 x front panel audio header
13. 1 x CD In connector
14. 1 x S/PDIF In header
15. 1 x S/PDIF Out header
16. 2 x USB 2.0/1.1 headers
17. 1 x IEEE 1394a header
18. 1 x power button
19. 1 x reset button
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x coaxial S/PDIF Out connector
4. 1 x optical S/PDIF Out connector
5. 1 x clearing CMOS button
6. 2 x IEEE 1394a ports
7. 4 x USB 2.0/1.1 ports
8. 2 x USB 3.0 ports
9. 2 x eSATA/USB Combo connectors
10. 2 x RJ-45 port
11. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8720 chip
H/W Monitoring
1. System voltage detection
2. CPU/North Bridge temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. Prise en charge de DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Prise en charge de @BIOS
2. Prise en charge de Q-Flash
3. Prise en charge de Xpress BIOS Rescue
4. Prise en charge de Download Center
5. Prise en charge de Xpress Install
6. Prise en charge de Xpress Recovery2
7. Prise en charge de EasyTune
8. Prise en charge de Dynamic Energy Saver 2
9. Prise en charge de Smart 6
10. Prise en charge de Auto Green
11. Prise en charge de eXtreme Hard Drive
12. Prise en charge de Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 24.4cm
Il est fortement recommandé de toujours utiliser la version de pilote la plus récente disponible.
N’oubliez pas de consulter notre site aussi souvent que possible afin de rester à jour sur les derniers pilotes, logiciels et jeux.
Essayez de définir un point de restauration système avant d’installer un pilote de périphérique. Cela vous aidera si vous avez installé un mauvais pilote. Des problèmes peuvent survenir lorsque votre périphérique matériel est trop ancien ou n’est plus pris en charge.
Télécharger