Gigabyte GA-P67A-UD7 (rev. 1.0) Intel SATA AHCI/RAID Preinstall Pilote 10.1.0.1008 x64
Type de fichier: Pilote.
Système d’exploitation: Windows Server 2003, Windows XP.
Nom de fichier: motherboard_driver_intel_sataraid_bootdisk_irst_64.exe.
Bit: 64 Bit.
Licence: Gratuit.
Description
CPU
1. Supports 2nd Generation Intel Core processors in the LGA1155 package
Chipset
1. Intel P67 Express Chipset
Memory
1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
2. Dual channel memory architecture
3. Prise en charge de DDR3 2133/1866/1600/1333/1066 MHz memory modules
4. Prise en charge de non-ECC memory modules
5. Prise en charge de Extreme Memory Profile (XMP) memory modules
Audio
1. Realtek ALC889 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Prise en charge de Dolby Home Theater
5. Prise en charge de S/PDIF Out
LAN
1. 2 x Realtek RTL8111E chips (10/100/1000 Mbit)
2. Prise en charge de Teaming
3. Prise en charge de Smart Dual LAN
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
3. 1 x PCI Express x1 slot
4. 2 x PCI slots
Multi-Graphics Technology
1. Prise en charge de 2-Way/3-Way ATI CrossFireX/NVIDIA SLI technology
Storage Interface Chipset:
1. 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
2. 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA 3Gb/s devices
3. Prise en charge de SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.
2 x Marvell 88SE9128 chips:
1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
2. Prise en charge de SATA RAID 0 and RAID 1
3. 2 x eSATA 6Gb/s connectors (eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices
4. Prise en charge de SATA RAID 0 and RAID 1
USB Chipset:
1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, including 2 eSATA/USB Combo, 4 via the USB brackets connected to the internal USB headers)
2 x Renesas D720200 chips and 2 x VLI VL810 hubs:
1. Up to 10 USB 3.0/2.0 ports (6 on the back panel, 4 via the USB brackets connected to the internal USB headers)
* The USB 2.0 signals of the 6 USB 3.0/2.0 ports on the back panel are from the Chipset.
IEEE 1394
T.I. TSB43AB23 chip:
1. Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394a bracket connected to the internal IEEE 1394a header)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 4 x SATA 6Gb/s connectors
4. 4 x SATA 3Gb/s connectors
5. 1 x CPU fan header
6. 3 x system fan headers
7. 1 x power fan header
8. 1 x Chipset fan header
9. 1 x front panel header
10. 1 x front panel audio header
11. 1 x S/PDIF Out header
12. 2 x USB 2.0/1.1 headers
13. 2 x USB 3.0/2.0 headers
14. 1 x IEEE 1394a header
15. 1 x clearing CMOS button
16. 1 x power button
17. 1 x reset button
Back Panel Connectors
1. 1 x PS/2 keyboard/mouse port
2. 1 x optical S/PDIF Out connector
3. 1 x coaxial S/PDIF Out connector
4. 2 x IEEE 1394a ports
5. 2 x USB 2.0/1.1 ports
6. 6 x USB 3.0/2.0 ports
7. 2 x eSATA/USB Combo connectors
8. 2 x RJ-45 ports
9. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8728 chip
H/W Monitoring
1. System voltage detection
2. CPU/System temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU/System/Power fan fail warning
6. CPU/System fan speed control
*Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
BIOS
1. 2 x 32 Mbit flash
2. Use of licensed AWARD BIOS
3. Prise en charge de DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Prise en charge de @BIOS
2. Prise en charge de Q-Flash
3. Prise en charge de Xpress BIOS Rescue
4. Prise en charge de Download Center
5. Prise en charge de Xpress Install
6. Prise en charge de Xpress Recovery2
7. Prise en charge de EasyTune
8. * Available functions in EasyTune may differ by motherboard model. Prise en charge de Dynamic Energy Saver 2
9. Prise en charge de Smart 6
10. Prise en charge de Auto Green
11. Prise en charge de eXtreme Hard Drive (X.H.D)
12. Prise en charge de ON/OFF Charge
13. Prise en charge de Cloud OC
14. Prise en charge de Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 24.4cm
Il est fortement recommandé de toujours utiliser la version de pilote la plus récente disponible.
N’oubliez pas de consulter notre site aussi souvent que possible afin de rester à jour sur les derniers pilotes, logiciels et jeux.
Essayez de définir un point de restauration système avant d’installer un pilote de périphérique. Cela vous aidera si vous avez installé un mauvais pilote. Des problèmes peuvent survenir lorsque votre périphérique matériel est trop ancien ou n’est plus pris en charge.
Télécharger