GCW Zero Game Console Firmware 2013-07-22
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: gcw0-update-2013-07-22.opk.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
Changements:
– Fixed problem where a headphone wouldn’t activate if plugged in when an application was already running
– Completely turn off sound at minimum volume setting
– Reduced pops when starting and stopping audio
– Umproved file type detection, in particular for data files used by emulators
– Fixed problem where powering off the device by holding the power slider for 3 seconds didn’t work in some situations
– GMenu2x will pick up new OPK files (uploaded through FTP, for example) without restarting
– The file selector in gmenu2x will accept all files by default
– Added clock to bottom bar in gmenu2x
REMARQUE:
The update process depends on which firmware version your Zero is currently running. To check the version, go to the « Settings » tab and start « System Info ». Look at the dates on the Compiled on lines.
How it works
– First make sure you have a backup of all valuable user data you have on your GCW Zero, such as save games.
– Download the most recent updater application above. Transfer the application (OPK file) to the apps/ directory on your GCW Zero.
– You can select an option with the d-pad and confirm your choice with the start button.
– While the update is in progress, you’ll see progress information being printed showing what the updater is doing. The update process takes a few minutes, please be patient while it does its work, even if you don’t see anything happening for a while on the screen.
– When you press start again, the system will restart. After the restart you can check that the new kernel and rootfs were installed in the System Info application
– The compile date for the kernel and rootfs should be equal to or very close to the date of the updater application.
– After the update is complete, you can remove the updater application (OPK file).
Télécharger