EVGA Z97 Stinger BIOS 1.07
Type de fichier: BIOS.
Système d’exploitation: AnyOS.
Nom de fichier: E972_107.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
BIOS 1.07 Updates:
– Adds support for Intel Pentium G3258 Overclocking
– Improved CPU P-State Functionality
– Added CPU Voltage Ring Ratio for Intel G3258 CPU
– Fix USB Halt Error
Windows Installation:
– Download the correct .zip file for your motherboard
– First go into your BIOS and load defaults, save and exit
– Close all open programs.
– Go into the folder where you unzipped this package and update.bat
– Press Y to start the flash process
– DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
– After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
– REMARQUE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.
BIOS Installation:
– Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
– Reboot the machine and go into the system BIOS
– From the BIOS, navigate to the Save & Exit tab and open « Select BIOS File. »
– Select the .bin file you wish to flash.
– After the flashing is finished, shut the system down completely. Then power on again.
– After flashing verify that the correct flash was applied by checking the version number on the lower right corner of the BIOS screen.
Télécharger