Buffalo WZR-900DHP Router Firmware 2.15
Type de fichier: Firmware.
Système d’exploitation: AnyOS.
Nom de fichier: WZR-900DHP_FW2.15.zip.
Bit: 32/64 Bit.
Licence: Gratuit.
Description
[Bug fixes]
– Fixed the issue where the help for the log information page was not displayed correctly on iOS 8 devices.
– Fixed the issue where in wireless bridge mode, the 5 GHz channel was not displayed.
How to update the firmware:
– Connect the AirStation to the same network as your PC. For best results, connect the AirStation directly to your PC with an Ethernet cable.
– Boot your PC.
– Confirm that the PC’s and the AirStation’s IP addresses are on the same network subnet. Refer to AirStation’s user manual to confirm how to change IP address settings.
– Open a browser and enter “192.168.11.1” in the URL field, then press the enter key.
– Enter “admin” for the username and “password” for the password. Note: If you changed the password, enter the password that you configured.
– Click “Update AirStation Firmware” at the left of the screen.
– Click “Browse” to the right of “Firmware File” and navigate to the firmware file.
– When the update starts, the power LED will blink red. It will take about 6 minutes to finish updating. When it finishes, the power LED will blink green or turn off. Do not disconnect power to the unit while the power LED is blinking red or your AirStation may be damaged.
– To confirm that your firmware is successfully updated, check the version number.
Télécharger