ICARUS Reader Omnia G2 Firmware 1.0.2_20120913
Tipo de archivo: Firmware.
Sistema Operativo: Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP.
Nombre del archivo: Omnia 201405 and later firmware package.zip.
Bit: 64 Bit.
Licencia: Gratuito.
Descripción
NOTA:
– Omnia 201405 and later firmware package
To upgrade the firmware of your ICARUS Omnia, do the following:
1. Descargue la actualización del firmware desde el sitio web de ICARUS. Nunca instale actualizaciones de sitios web de terceros, esto invalidará su garantía. You can find the upgrade files in the Downloads Section of the website. Click on the image of the ICARUS Omnia to open the downloads for this product. If there are no files here it means that no firmware upgrade is available yet.
2. Descomprima el archivo en una carpeta de su computadora usando una herramienta de descompresión como WinZip o 7Zip. Posiblemente puede hacer esto incluso con la funcionalidad de su sistema operativo, pero esto depende de la versión del sistema operativo que su computadora haya instalado.
3. Hay 3 archivos en el paquete de descarga:
1) estas instrucciones
2) un archivo con la extensión * .img y
3) the application LiveSuitPack_v1.07.
4. Run the LiveSuitPack_v1.07 application. This will unzip all files inside this archive to the current folder
5. In this folder there are several driver installation files with the names drvinstaller_IA64, drvinstaller_X64, drvinstaller_X86. If your operating system is Windows XP or lower, do not do anything with these files. If your computer’s operating system is Windows 7 32-bit, run drvinstaller_X86. If your operating system is Windows 7 64-bit, run drvinstaller_X64.
6. Run the application LiveSuit.exe
7. Press the button to select the actual firmware file. This file ends with the extension *.img and is found in the folder that you unzipped the firmware download package to 8. Now connect the ICARUS Omnia e-reader via the USB cable 9. Wait until the Omnia’s screen shows that there is a USB connection (“USB Connected”)
10. Click on the “Settings” button to install the firmware. In the pop-up screen that now opens, select yes.
11. A screen will pop-up.
Select No. This will do an upgrade without formatting the e-reader’s memory.
12. The e-reader will start upgrading, a progress bar will show the progress. Upgrading will take a couple of minutes 13. After a few minutes the update is complete.
14. The upgrade is now finished and the the e-reader will restart
15. After a firmware upgrade you will have to select your default language again
16. Your e-reader is now ready for use again!
Descargar