Intel M10JNP2SB Server Board Firmware 7.214
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: M10JNP2SB_EFI_BIOS_7214_BMC_8100.01.07.01.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
Intel highly recommends reading this document in its entirety before performing the firmware update. Verifying that your board meets the documented requirements will ensure a successful update and provide the most reliable.
Änderungen:
– Based on 7213_Production.ROM
– Fixed WHQL Test Failed.
– Change logo : 1024X768_Intel_SB_BIOS_splashscreen.jpg
– Set “DMI System Information -> Product Name is only the contents of FRU 0’s „Product Name“ SMBIOS Type1 Product Name = BMC FRU Product Information: Product Name
– Fixed that Network Stack configuration could not be configured with SCE Tool.
– Added Intel workaround for detecting TCC active.
Support Intel Password requirement:
1. Disabled power on password during system boot.
2. Boot options can’t be changed with user access permissions.
3. BBS Menu option is available with key in Administrator Password when Administrator Password configured.
HINWEIS:
– If you program SPI flash by programmer please use „M10JNP2SB_8100.01.06.ima“.
– If you update FW by Yafuflash/WEB, please use „M10JNP2SB_8100.01.06.ima_enc“.
This update package includes the following production level firmware updates:
– Board BIOS – 7.214
– BMC Firmware – 8100.01.07.01
Firmware update tools
– Yafuflash
– SocFlash utility
A local flash BIOS with ME update V7.xxx step by step:
01) Extract M10JNP2SBXXXX.zip to USB Storage.
02) Power on your system and boot to EFI SHELL.
03) Change and find the USB storage current directory (For example ‚fs0:M10JNP2SBXXXX‘).
04) Run Update_BIOS.nsh
05) Flash finished, do AC off.
06) AC on, check BIOS revision and ME revision with normal status on BIOS Setup Menu.
Download