Atomos Shogun Flame Recorder Firmware 7.3
Dateityp: Firmware.
Betriebssystem: AnyOS.
Dateiname: ATOMSHF_7.3.zip.
Bit: 32/64 Bit.
Lizenz: Kostenlos.
Beschreibung
BUG FIXES:
– Fixed an occasional issue where audio recorded on channels 5 to 8 was corrupted when received from some equipment.
– Fixed an issue where audio noise was introduced from sources such as Nikon D800 and Microsoft XBOX
Analog audio embedding on loop out signal
– Turn on “Embed Analog audio” in the Audio menu.
– Select which channel to embed by clicking on the “A” button.
– The embedded channel will replace the existing channel on the loop out.
– Audio meters will continue to show the input signal.
HDR metadata embedded in .mov files
– Added correct metadata to .mov files for Rec.2100 modes (PQ and HLG) when AtomHDR monitor mode is enabled.
HLG support for Panasonic GH5 and Sony FS5
– Access via the monitor mode AtomHDR menu
HDR support for Red Log3G10
– Access via the monitor mode AtomHDR menu
Added the option to pause video during slow motion playback
– Secure Erase is supported on selected media for: Sandisk Extreme Pro, Atomos branded Gtech media, Atomos branded Angelbird media, Sony SV-GS series
Firmware Update Tutorial:
– Download and unzip the file.
– Copy the file onto a recommended, formatted driver, using the docking station included with your recorder.
– Insert the drive into the Atomos recorder while it’s off.
– Power up the Atomos recorder.
– The screen will show flashing lines of color. This is normal – DO NOT power off!
– Updating will take a few minutes.
– Once completed, the Atomos recorder will power down.
– Power up the Atomos recorder again.
– Check Menu > Product Info > AtomOS Version. This should match the version you have just downloaded.
– Enjoy your updated Atomos recorder !
Firmware Recovery Tutorial:
– Power down the Atomos recorder (Hold power button for 4 seconds).
– Hold down the power button for 10 seconds approximately.
– You will see the “Firmware Update Failed” screen.
– Insert your HDD / SSD.
– The install process will begin and the screen will show flashing lines of color. This is normal – DO NOT power off !
– Once completed, the Atomos recorder will power down.
– Enjoy your updated Atomos recorder !
Download