PHOTTIX Mitros+ TTL Flash için Nikon Firmware 1.17
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS, Mac.
Dosya adı: Mitros_for_Nikon_v1.17.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
değişiklikler:
– Adds back the feature of triggering of Strato II receivers and Mitros+ Flashes in Strato II Receiver mode when using Odin Transmitter mode
Before you begin:
– Unzip the firmware archive and save it to your computer desktop
– The archive will contain three upgrade files: Phottix Mitros PC Upgrade.EXE (the upgrade software), the latest firmware (an .FDS file and an .FIF file), and instructions and notes on the upgrade.
Checking the Firmware Version Number:
– Open the folder containing the upgrade.
– Double click on Phottix Mitros PC Upgrade.EXE. This will start the upgrade software.
– Connect the USB cable to the computer. (The USB cable is included with the Mitros/Mitros+)
– Connect the other end of the USB cable to the Flash.
– Move the power switch on the Mitros/Mitros+ to the ON position.
– When the Mitros/Mitros+ is connected successfully the computer will detect a new removable storage device (FDT11TA V01), and an icon ( in Windows XP OS, in Windows 7 and Windows 8 OS) will appear on the lower right corner of the computer screen.
– Click the “Version” icon.
– The current firmware version of the connected flash will be displayed in the software window.
– Upon completion, exit the software and disconnect the Mitros/Mitros+ from the USB cable.
Upgrading the Phottix Mitros/Mitros+:
– Open the folder containing the upgrade.
– Double click on Phottix Mitros PC Upgrade.EXE. This will start the upgrade software.
– Connect the USB cable to the computer. (The USB cable is included with the Mitros/Mitros+)
– Connect the other end of the USB cable to the Flash.
– Move the power switch on the Mitros/Mitros+ to the ON position.
– When the Mitros/Mitros+ is connected successfully the computer will detect a new removable storage device (FDT11TA V01), and an icon (in Windows XP OS, in Windows 7 and Windows 8 OS) will appear on the lower right corner of the computer screen.
– Two firmware files need to be upgraded: the .FDS file and the .FIF file.
– Click the Software image. Select the .FDS upgrade from the upgrade archive folder. The status of the upgrade will be displayed in the progress bar.
– Click the Icon image. Select the .FIF upgrade from the upgrade archive folder. The status of the upgrade will be displayed in the progress bar.
– After completion an “Update OK” message will be displayed both at the bottom of the upgrade software window and on the LCD display of the ash.
– Upon completion, exit the software and disconnect the Mitros/Mitros+ from the USB cable.
İndirme