Peplink Pepwave Surf SOHO HW2 Router Firmware 8.1.0
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: fw-surf_soho-8.1.0-build4941.bin.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
New Features:
– [SpeedFusion Cloud] Added SpeedFusion Cloud support
– [SpeedFusion Cloud] Added ability to connect up to three region of SpeedFusion Cloud
– [SpeedFusion Cloud] Added ability to select the LAN device to route all traffic to the SpeedFusion Cloud link for Internet access
– [SpeedFusion Cloud] Added Dynamic Weighted Bonding algorithm support for SpeedFusion Cloud (To enable this feature, please go to https://<Device’s IP>/cgi-bin/MANGA/support.cgi and choose Traffic Distribution Policy)
Compatible with All Models (Except FusionHub)
– [SpeedFusion Cloud & Wi-Fi AP] Added ability to create the new SSID for the SpeedFusion Cloud profile under the new SpeedFusion Cloud page. Wi-Fi clients connect to the newly created SSID will use the related SpeedFusion Cloud link for Internet access
Compatible with Balance: 30 Pro, One
Compatible with MAX: 700, BR1/2, HD2/4, Transit (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/4
Compatible with X Series: MBX, 20X
Compatible with Surf SOHO
– [SpeedFusion] Added Dynamic Weighted Bonding: a new SpeedFusion bonding algorithm for dynamic bandwidth connections, eg: cellular. (To enable this feature, please go to https://<Device’s IP>/cgi-bin/MANGA/support.cgi and choose Traffic Distribution Policy)
– [SpeedFusion] Revamped SpeedFusion Chart shows additional statistics
Compatible with Balance: B210 or above
Compatible with MAX: 700, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with SFE
Compatible with X Series: EPX, SDX, MBX, 310X
Compatible with FusionHub
– [NTP Server] Added support for NTP Server
Compatible with Balance: All
Compatible with MAX: BR1 ENT, 700 HW3, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: All
– [NetFlow] Added NetFlow Support (To enable this feature, please go to https://<Device’s IP>/cgi-bin/MANGA/support.cgi)
Compatible with Balance: 30 LTE/Pro, One/Two, 210/310 HW4 or above, 305/380 or above
Compatible with MAX: BR1 ENT, Transit, 700 HW3 or above, HD2 HW5 or above, HD4
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX, MBX, 310X, 20X
Compatible with FusionHub
– [Drop-in Mode] Added Drop-in mode support
Compatible with Balance: All
Compatible with MAX: All
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with X Series: All
– [GPS] Added support for GPS time as time sync source and able to select GPS as the primary time sync source under System > Time
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/4
Compatible with X Series: EPX, SDX, MBX, 310X, 20X
– [MediaFast & KVM] Added KVM support
Compatible with MediaFast: 500, 750
– [Wi-Fi WAN & WPA3] Added support for WPA3 security policy
Compatible with MAX: BR1 MK2, Transit, 700 HW3 or above, HD2 HW5 or above, HD4
Compatible with MediaFast: HD2/4
Compatible with X Series: MBX
Compatible with Surf SOHO: SOHO MK3
Feature Improvements:
– [AP Controller & WPA3] Added WPA3 support in AP Controller
– [AP Controller] Added support for 802.11k neighbor report base on Wireless SSIDs
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX, MBX
– [API & Cellular] Added the ability to receive SMS messages through cellular connections
Compatible with Balance: 20X, 30 LTE/Pro, 310X
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X Series: EPX, SDX, MBX
– [Captive Portal & Enterprise models] Added Desteği 16 Captive Portal Profiles in enterprise-grade models
Compatible with Balance: 305/380 or above
Compatible with X Series: EPX, SDX
– [Cellular] Added custom hosts for ping target on SmartCheck
– [Cellular] Added support for prioritizing cellular carriers
– [Cellular] An Icon will be displayed on Cellular status of Dashboard when Bandwidth Allowance Monitor usage hits 100% and “Reserve for management traffic” option is enabled
Compatible with Balance: 30 LTE/Pro
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X Series: EPX, SDX, MBX, 310X, 20X
– [API] Added the ability to send USSD codes via cellular connections
– [API] Added the ability to set a new Billing Cycle
– [BGP] The Status display now shows exported routes
– [CLI] Added support for performing ping / traceroute from specific LAN or WAN Interfaces
– [CLI] The CLI now uses the”Device Name” instead of the “Router Name” when responding to the “get system” command.
– [Client List] Added ability to disconnect the Wi-Fi and Remote User Access clients
– [DHCP] Fixed an issue where the DHCP server may not reply to DHCP discovery or requests in rare situations
– [DPI] Added recognition of new protocols.
– [DPI] Added the ability to detect P2P, Gaming categories, and IoT Protocols
– [DPI] Updated the protocols of DPI Report which will be consistent with Web UI
– [E-mail Notification] Added support of STARTTLS
– [URL Logging] URL Logging has been relocated from Content Blocking page to System > Event Log. If Server/Port information is not specified for URL or Session Logging, Remote Syslog server settings will be used
– [WAN Analysis] Added support for UDP tests of up to 2 Gbps bandwidth
– [WAN] Added support for using the default LAN IP address as the outgoing IP for Local Services
– [Web UI] Added a TB scale in addition to MB, GB in Usage Reports
– [Web UI] Added the Ability to access Web Admin page from IP Forwarding WAN via LAN/VLAN IP
– [Web UI] After pressing Apply Changes, the WebUI will now stay on the same page and display a message instead of going to the Dashboard page
– [Web UI] The Firewall Log will now put in its own page rather than in the Event Log
– [Web UI] The Web UI now uses the “Device Name” instead of the “Router Name” on the Status and System pages
– [Web UI] Updated supported browsers: Mozilla Firefox 54, Google Chrome 51, Safari 10, Microsoft Edge 15
– [System] Added support for ECDSA certificates in the Certificate Manager
– [System] Added Desteği Session Logging
– [System] Added support of telnet command inside SSH CLI
– [System] Added the ability to access CLI from the WAN via LAN/VLAN IP in IP Forwarding mode
– [System] Added UDP protocol supporting for Custom Service Forwarding
– [System] IP Forwarding WAN supports NAT for Multiple LAN network
– [System] Support TACACS+ for web admin access authentication
– [System] Updated Daylight Saving Time support for “Pacific/Fiji” and “Australia/Lord_Howe” regions
– [SNMP] Added the ability to define the Allowed WAN Interface for SNMP under System > WAN Connection Access Settings
– [SNMP] Updated Cellular and Wi-Fi MIB files
– [OpenVPN] Added ability to push WINS server directly to clients
– [OpenVPN] Added the ability to define port number and to choose whether to use UDP or TCP mode
– [OpenVPN] Added the ability to push DHCP Option 15 to client
– [OpenVPN] Custom DNS Servers in LAN DHCP Server can now be pushed to client
– [Outbound Policy] Added web filtering categories to Outbound Policy for SpeedFusion / PepVPN Sub-Tunnel
– [PepVPN] Added the ability to use an external TCP Accelerator to support the WAN connections
– [Firewall] Added an icon on Firewall rule in order to indicate that Firewall Logging is enabled
Compatible with All Models
– [DNS Server] Added a maximum length restriction for some DNS settings in accordance to RFC
Compatible with Balance: 210 or above
Compatible with MediaFast: 500/750
– [Drop-in Mode] Added support for VLAN clients ability to route traffic over Drop-in WAN
Compatible with Balance: All
Compatible with MAX: All
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with X Series: All
– [Drop-in Mode] Layer 3 SpeedFusion added compatibility for Drop-in Mode with Shared IP
Compatible with Balance: All
Compatible with MAX: All
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with X Series: All
– [EPX] Added support for jumbo frame on LAN
– [EPX] Added support for MediaFast / ContentHub / Docker
Compatible with X Series: EPX
– [HD4 | MBX] Added voltage and current threshold information to Event Log. (To enable this feature, please go to https://<Device’s IP>/cgi-bin/MANGA/support.cgi)
Compatible with MAX: HD4
Compatible with X Series: MBX
– [Ignition Sensing] Added Ignition Sensing support on the UBR LTE
Compatible with UBR: UBR LTE
– [IP Passthrough] Added the ability to define custom DNS for IP Passthrough WAN
Compatible with Balance: 30 Pro
Compatible with MAX: BR1, Transit
Compatible with UBR: UBR LTE
Compatible with Surf SOHO: SOHO HW2 / MK3
Compatible with X Series: 20X
– [LAN / SDX] Enhanced the LAN Port Setting page
Compatible with X Series: SDX
– [MediaFast 500/700] Added support for SpeedFusion Bonding by default
Compatible with MediaFast: 500, 750
– [MediaFast] Updated the MediaFast Certificate to support macOS 10.15 and iOS 13 clients
Compatible with MediaFast: All
– [Serial Port] Added support for accessing the serial interface via the CLI and Web CLI of InControl 2. (Remark: Both Admin and Read Only Users can access the serial interface via CLI and Web CLI of InControl 2)
Compatible with MAX: BR1 Slim/Mini/M2M/ENT, Transit, HD2 Mini
– [SpeedFusion] QoS Individual Bandwidth Limits can now be applied to SpeedFusion profiles
Compatible with Balance: B210 or above
Compatible with MAX: 700, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with SFE
Compatible with X Series: EPX, SDX, MBX, 310X
Compatible with FusionHub
– [UART] Added CLI support for getting UART status and statistics
Compatible with MAX: BR1 Slim/Mini/M2M/ENT, Transit, HD2 Mini
– [Wi-Fi AP & WPA3] Added WPA3 support in build-in Wi-Fi AP
Compatible with Balance: 30 Pro, One
Compatible with MAX: BR1 MK2, Transit, 700 HW3 or above, HD2 HW5 or above, HD4
Compatible with MediaFast: 200, HD2/4
Compatible with X Series: MBX, 20X
Compatible with Surf SOHO: SOHO MK3
– [Wi-Fi WAN] Added support for 802.11w on the Wi-Fi WAN if the associated AP supports 802.11w
Compatible with MAX: 700, BR1/2, HD2/4, Transit (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/4
Compatible with X Series: MBX
Compatible with Surf SOHO
Resolved Issues:
– [AP Controller] Fixed an issue where the AP Controller stopped managing APs in rare situations
– [AP Controller] Fixed an issue where the Client Connection History displays incorrect From / To columns
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX, MBX
– [Captive Portal] Enhanced HTTPS redirection on the captive portal landing page for deployments using InControl Appliance and a custom certificate
– [Captive Portal] Fixed an issue where “502 Bad gateway” may be shown on Wi-Fi clients when they are accessing the landing page
– [Captive Portal] Fixed an issue where the captive portal splash page cannot be shown
– [Captive Portal] Fixed an issue where throughput limits would not be released after the E-mail address is verified using InControl 2 E-mail Authentication
– [Captive Portal] Fixed an issue where Wi-Fi users may get logged out if using InControl 2 to manage the Captive Portal
– [DPI] Fixed issues causing system instability when using DPI
– [OpenVPN] Fixed an issue where the MS-CHAPv2 Authentication method does not work
– [Outbound Policy & Firewall by Hostname] Fixed a compatibility issue with DNS server 1.1.1.1
– [Outbound Policy] Fixed an issue where the Outbound Policy Expert Mode Rules cannot override OSPF/BGP Routes learned from the LAN
– [Outbound Policy] Fixed an issue where the Weighted Balance algorithm with Fall-through does not work on WANs that have failed their Health Check
– [PepVPN] Fixed an issue in Port Forwarding where PepVPN NAT Mode may not work after cold failover
– [PepVPN] Fixed an issue of Bandwidth Limit does not work on Layer 2 PepVPN
– [PepVPN] Fixed an issue that causes system instability when a WAN within PepVPN goes down.
– [PepVPN] Fixed the issue where the PepVPN profile mayrandomly fail to establish if there is a large number of PepVPN connection requests from the spoke devices
– [PepVPN] PepVPN will not disconnect if Remote IP Address configuration has been updated by InControl 2
– [Port Mapping] Fixed an issue where Port Mapping rules with Additional WAN IP are unable to remove completely when the WAN is down
– [PPPoE] Fixed an issue where the VLAN WAN which is using PPPoE provides an incorrect MTU value
– [Service Passthrough] Fixed an issue where disabling IPsec NAT-T Passthrough may not work
– [SNMP] Fixed an issue where SNMP may cause the Event Log to stop working
– [SNMP] Fixed an issue where SNMP may consume large amounts of CPU resources when Layer 2 SpeedFusion is established
– [SpeedFusion Cloud] Outbound Firewall Rules is not effective for SpeedFusion Cloud rather than Internal Firewall Rules
– [System] Fix for the CVE-2018-1000517 vulnerability
– [System] Fix for the CVE-2019-1543 vulnerability
– [System] Fix for the CVE-2019-5747 vulnerability
– [System] Fix for the CVE-2019-9169 vulnerability
– [System] Fix for the CVE-2020-8597 vulnerability
– [System] Fixed an issue of User Report is unable to show PepVPN usage per WAN
– [System] Fixed an issue where disconnected WAN connections may still accept routing UDP traffic to the LAN
– [System] Fixed an issue where Local DNS records do not work with Firewall / Outbound Policy by Hostname
– [System] Fixed an issue where SIP packets may be dropped if its CSeq field equal to 0
– [System] When a default route is exists on a LAN-based Static Route, the Client Usage report may display incorrect usage
– [Web UI] Fixed an issue of unexpected files can be downloaded from Web Admin
– [Web UI] Fixed an issue where the “Apply Changes” button does not function when there are config changes
– [Web UI] Fixed an issue where the MAC address cannot be shown in the Client List
Compatible with All Models
– [B310X] Fixed an issue where the Ethernet Port status display showed incorrect information on Balance 310X
Compatible with X Series: B310X
– [Cellular & Redundant SIM Slots] Fixed an issue where the APN does not show in then WAN Interface on the unit when it does not have a Redundant SIM inserted
– [Cellular & Redundant SIM Slots] SIM cards cannot be detected when only SIM slot B has SIM card
Compatible with Balance: 30 LTE/Pro
Compatible with MAX: BR1/2, HD2/4 (Except HD2), Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X Series: EPX, SDX, MBX, 310X, 20X
– [Cellular] Fixed an issue where another SIM will not be used when the current SIM reaches its bandwidth quota and becomes restricted to management traffic
– [Cellular] Fixed an issue where cellular connections are unable to connect after a cellular reset
– [Cellular] Fixed an issue where the device is unable to read large amounts of SMS
Compatible with Balance: 30 LTE/Pro
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/HD4
Compatible with X Series: EPX, SDX, MBX, 310X, 20X
– [Docker] Fixed an issue where an import error will be prompted when the Docker image name contains unexpected characters.
Compatible with MediaFast: 500, 750
– [Drop-in Mode & HA] Fixed an issue where using Drop-in mode with HA will cause the WAN Interface of the Slave unit to reply to ARP requests incorrectly
Compatible with Balance: 210 or above
– [Firmware Upgrade] Fixed a potential issue causing upgrade failure
Compatible with MAX: BR1/2
Compatible with UBR: UBR LTE
– [HA] Fixed an issue where the device takes too much time to assume Master role when the it has more than 300 VLANs
– [HA] Fixed an issue where the Outbound Policy affects the local service of a Slave unit in an HA pair
Compatible with Balance: 210 or above
Compatible with MAX: BR1/2, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX, MBX, 310X
– [IC2 Bandwidth Usage] Fixed an issue where the Per-Minute Bandwidth Usage information for some intervals are missing on devices that have more active WANs
Compatible with Balance: 1350, 2500
Compatible with EPX
– [IP Passthrough] Fixed an issue where the IP Passthrough is not enabled after pressing “Apply Changes” when the WAN is using a Static IP
Compatible with Balance: 30 Pro
Compatible with MAX: BR1, Transit
Compatible with UBR: UBR LTE
Compatible with Surf SOHO: SOHO HW2 / MK3
Compatible with X Series: 20X
– [LAN / SFE] Fixed an issues where the LAN packet may forward to the wrong interface
Compatible with SFE: SFE, SFE CAM
– [LAN / SOHO MK3] Fixed an issue where the LAN Access Port may not pass traffic on Surf SOHO MK3
Compatible with Surf SOHO: SOHO MK3
– [LAN PoE / IP55] Fixed an issue where PoE ports do not work on BR1/2 IP55
Compatible with MAX: BR1/2 IP55
– [PoE & HD4 IP67] Fixed an issue where the PoE port does not work on the MAX HD4 IP67
Compatible with MAX: MAX HD4 IP67
– [SpeedFusion] Fixed an issue where FEC is unable to reassemble packets properly
– [SpeedFusion] Fixed an issue where FEC may drop packets when the packet rate is low
– [SpeedFusion] Fixed an issue where the TCP data tunnel does not work on a high latency link
– [SpeedFusion] Fixed an issue where using SpeedFusion FEC causes system instability
Compatible with Balance: B210 or above
Compatible with MAX: 700, HD2/4, Transit
Compatible with UBR: UBR LTE
Compatible with MediaFast: All
Compatible with SFE
Compatible with X Series: EPX, SDX, MBX, 310X
Compatible with FusionHub
– [UART] Fixed an issue where TCP Client mode may make multiple TCP connections to the server
Compatible with MAX: BR1 Slim/Mini/M2M/ENT,
Compatible with Transit, HD2 Mini
– [USB WAN] Fixed an issue where the WebUI is unable to display IMSI and ICCID
Compatible with Balance: All
Compatible with MAX: BR1 ENT, HD2/4 Indoor Series
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX, MBX, 310X
Compatible with Surf SOHO
– [WAN as LAN & HA & Modular] Fixed an issue where the WAN Port as LAN Port feature does not work after HA failover
Compatible with X Series: EPX, SDX, 310X
– [Web UI / BR1 IP55 HW4] Fixed an issue where the Web UI cannot save changes to cellular antenna selection on the BR1 IP55 HW4
Compatible with MAX: BR1 IP55 HW4
– [Wi-Fi AP] Fixed an issue where incorrect SSID usage caused the device to lose the ability to connect to IC2
– [Wi-Fi AP] Fixed an issue where the Client List may show 0.0.0.0 for Wi-Fi Client
– [Wi-Fi AP] Fixed an issue where using InControl 2 to manage the Wi-Fi AP would cause an unexpected 5GHz channel to be used if the Channel is set to “Auto”
Compatible with Balance: 30 Pro, One
Compatible with MAX: 700, BR1/2, HD2/4, Transit (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with MediaFast: HD2/4
Compatible with X Series: MBX, 20X
Compatible with Surf SOHO
– [Wi-Fi WAN] Fixed an issue where the Wi-Fi WAN Channel Width will display “20 MHz” after being configured to “20/40/80 MHz”
– [Wi-Fi WAN] Fixed the issue of incorrect cutoff signal value
– [Wi-Fi WAN] Fixed the issues of scan penalty applied when roaming is enabled
Compatible with MAX: 700, BR1/2, HD2/4, Transit (Exclude: BR1 ENT, HD2 Mini, HD1/2 Dome)
Compatible with UBR: UBR LTE
Compatible with MediaFast: HD2/4
Compatible with X Series: MBX
Compatible with Surf SOHO
Known Issues:
– [AP Controller] AP Controller supports up to one firmware pack only
Compatible with Balance: All
Compatible with MAX: 700, HD2/4, Transit
Compatible with MediaFast: All
Compatible with X Series: EPX, SDX, MBX
– [Outbound Policy] Routing performance will be degraded if Outbound Policy is configured using the “by Domain” rule.
Compatible with All Models (Except FusionHub)
– [PepVPN] PepVPN performance will be degraded if using “TCP Expose” mode
Compatible with All Models
İndirme