Nikon Z 5 Camera Firmware 1.02 için macOS
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Mac.
Dosya adı: F-Z5-V102M.dmg.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
değişiklikler:
– Added support for NIKKOR Z 50mm f/1.2 S lenses.
– Fixed an issue that resulted in certain aperture values not being selected when control rings for the following lenses were rotated to stop aperture down in movie mode: NIKKOR Z 24–50mm f/4–6.3, NIKKOR Z 24–200mm f/4–6.3 VR, NIKKOR Z DX 16–50mm f/3.5–6.3 VR, NIKKOR Z DX 50–250mm f/4.5–6.3 VR
– Fixed an issue that prevented the TTL flash compensation value selected with the camera being reflected by the flash units, resulting in flash compensation not being applied, when: two or more flash units were controlled via radio AWL, and all flash units were in the same group.
Camera Firmware Sürümünü Görüntüleme:
– Kamerayı aç.
– Kamera MENU düğmesine basın ve kamera üretici yazılımı sürümünü görüntülemek için KURULUM MENÜSÜ’nde Yazılım versiyonu öğesini seçin.
– Kamera sabit yazılımının sürümünü kontrol edin.
– Kamerayı kapat.
Kamera Ürün Yazılımını Güncelleme:
– Bilgisayarın sabit diskinde bir klasör oluşturun ve istediğiniz şekilde adlandırın.
– Download the file to the folder newly-created.
– Extract the file to a folder named “Z6Update”
– Using a card slot or card reader, copy the .bin to a memory card that has been formatted in the camera.
– Note: Be sure to copy the firmware to the root (top-most) directory of the memory card. The camera will not recognize the new firmware if it is placed in a folder under the root directory.
– Insert the memory card into the camera and turn the camera on.
– SETUP MENU içinde Firmware sürümünü seçin ve bellenim güncellemesini tamamlamak için ekrandaki talimatları izleyin.
– Güncelleme tamamlandıktan sonra, kamerayı kapatın ve hafıza kartını çıkarın.
– Bellenimin yeni sürüme güncellendiğini doğrulayın.
İndirme