Nikon D500 Camera Firmware 1.20
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Windows 10, Windows 7, Windows 8, Windows 8.1.
Dosya adı: F-D500-V120W.exe.
Bit: 64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Aşağıdaki sorunlar düzeltildi:
– The camera can now connect via Wi-Fi to devices running SnapBridge. For more information, see the “Addendum to the User’s Manual” in which this feature is described. Before using this feature, upgrade to the following version of the app: SnapBridge version 2.5.4 or later
– The camera sometimes had trouble focusing on subjects in the focus points at the edges of the frame.
– The camera would sometimes stop responding during shooting in continuous high-speed (CH) release mode.
– The camera would sometimes not turn off after the power switch was rotated to “OFF”.
Updating from “C” Firmware Versions 1.00 through 1.12 to Version 1.20
– You will need to perform the update twice. Performing the update for a second time completes the firmware update.
– During the first update, the camera may or may not display the message, “Update failed. Contact a Nikon-authorized service representative.” Continue with the second update regardless.
– Performing the Second Update: Complete Steps 5 through 7 of “Updating the Camera Firmware”.
– A Note on the Second Update: Note that the firmware version may or may not change as a result of the first update. If the firmware version has changed, the “Current” and “New” versions displayed in the “Update?” dialog will be the same; otherwise, the two versions will be different. In either case, the firmware version will be updated when you perform the update a second time.
– SnapBridge App Unable to Connect: If the SnapBridge app is unable to connect to the camera after the update, you may not have performed the second update. Select Connect to smart device in the camera SETUP MENU to display the app and camera name; if the Bluetooth icon does not flash in the display, you will need to perform the update again.
Camera Firmware Sürümünü Görüntüleme:
– Kamerayı aç.
– Kamera MENU düğmesine basın ve kamera üretici yazılımı sürümünü görüntülemek için KURULUM MENÜSÜ’nde Yazılım versiyonu öğesini seçin.
– Kamera sabit yazılımının sürümünü kontrol edin.
– Kamerayı kapat.
Kamera Ürün Yazılımını Güncelleme:
– Bilgisayarın sabit diskinde bir klasör oluşturun ve istediğiniz şekilde adlandırın.
– İndirilebilir dosyayı yeni oluşturulan klasöre kaydedin.
– Run the package to extract a .bin file (the camera firmware) to a folder named “D500Update”
– Bir kart yuvası veya kart okuyucusu kullanarak, .bin dosyasını kopyalayın. Kamerada formatlanmış bir hafıza kartı.
– Hafıza kartını kameradaki Yuvaya 1 yerleştirin ve kamerayı açın.
– SETUP MENU içinde Firmware sürümünü seçin ve bellenim güncellemesini tamamlamak için ekrandaki talimatları izleyin.
– Güncelleme tamamlandıktan sonra, kamerayı kapatın ve hafıza kartını çıkarın.
– Bellenimin yeni sürüme güncellendiğini doğrulayın.
İndirme