NETGEAR XSM4348CS Switch Firmware 12.0.11.11
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: GSM_XSM4300_V12.0.11.11.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Bug Düzeltmeler:
– Multicast addresses 239.255.255.254 & 239.255.255.255 are removed from the reserved multicast list that they are treated as regular addresses that its packet will be dropped if IGMP snooping is enabled on the port.
– L3 multicast configuration command “ip multicast” is removed from the default switch configuration. Switch running firmware versions 12.0.11.8 or 12.0.11.10 using L3 multicast configuration will need to add the command “ip multicast” manually to restore L3 multicast functionality. This does not apply to the L2 multicast configuration.
– Removed an IGMP snooping log message “SNOOP[snoopTask]: snooping_outcalls.c(1286) 1150 %% Couldn’t get outgoing vlan intf mask for group 224.1.1.20, vlan 1”.
– Enhanced tech-support file to collect the output of the command “show spanning-tree active”.
– If IGMP snooping enabled for VLANs other than management VLAN (VLAN 1) in 12.0.9.x or prior releases and is upgraded to 12.0.11.8 or 12.0.11.10 then control traffic sent to reserved multicast addresses (such as PTP, routing protocols traffic) is getting dropped. This issue is fixed in the 12.0.11.11 release.
– Stack master randomly reboots every 30-60 days. This was due to a memory leak in Bonjour and a few other processes which are fixed in 12.0.11.11 release.
Known Issues:
– A new GUI page is added in 12.0.11.x release under Routing > Multicast > Mroute Static-Multicast Configuration. This page doesn’t show up when the switch firmware is upgraded from 12.0.9.x to 12.0.11.x. Clear the browser cache to view this newly added page.
İndirme