NETGEAR GSM4328PB Switch Firmware 12.0.11.10
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: AnyOS.
Dosya adı: GSM_XSM4300_V12.0.11.10.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Bug Düzeltmeler:
– When video decoders are registered and unregistered frequently to different multicast streams in a L2 & L3 multicast setup, some decoders don’t receive video streams.
– Enhanced tech-support file to collect output of following commands: show switch detail, show eventlog and show ip management.
– Ports go into detach state when “autostate” is disabled on a VLAN and then switch is rebooted.
– When the switch is upgraded to firmware version 12.0.11.8 it freezes during reload with certain configuration.
– Change default QoS trust mode from dot1p to ip-dscp (from ‘classofservice trust dot1p’ to ‘classofservice trust ip-dscp’): When a customer does image upgrade from 12.0.9.3 or earlier versions to 12.0.11.10 or later releases, default/explicitly configured QoS dot1p (in the old image) will be changed to ip-dscp. If customer wants dot1p QoS mode, then customer has to explicitly configure dot1p again after the image upgrade.
Known issues:
– When video decoders are registered and unregistered frequently in a L2 & L3 multicast setup following log messages appear in the log buffer. These messages are harmless & can be ignored.
İndirme