Intel S2600WT2 Server Board Ethernet Sürücüsü 25.2 için Server 2016
Dosya tipi: Sürücüsü.
Işleti̇m Si̇stemi: Windows Server 2016.
Dosya adı: PROWinx64.exe.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
What’s New in This Release
– Desteği the Intel Ethernet Controller E810-C
– Desteği the Intel Ethernet Controller E810-C for backplane
– Desteği the Intel Ethernet Controller E810-C for QSFP
– Desteği the Intel Ethernet Controller E810-C for SFP
– Desteği the Intel Ethernet Network Adapter E810-C-Q2
– Desteği the Intel Ethernet Network Adapter E810-XXV-4
değişiklikler:
– The Intel Ethernet Controller E810 supports up to 100Gb/s throughput for the mainstream market for a variety of workloads used in Communications, Storage, Enterprise, Hybrid Cloud, Artificial Intelligence etc.
– For X722 devices installed in a Linux system, added a mechanism to set Forward Error Correction (FEC) mode
Intel Ethernet 700 Series Changes:
– General: MPLS (mpls-pay.pkg) and eCPRI (ecpri.pkg) DDP packages cannot be loaded.
– Linux Driver: More than 16 VLANs assigned to a Virtual Function (VF) in untrust mode are operational
– Linux Driver: Ethtool (via ethtool -m comand) and dmesg displays information that the SFP module is not inserted on the platform where there is no SFP cage.
– Linux Driver: FEC mode setting is not available for Intel Ethernet Controller X722 devices (via ethtool — show-fec command).
– Linux Driver: VF is not operational when a number of queues has been changed without turning off the VF first.
– Linux Driver: List of MAC addresses assigned to VF is removed after an Intel AVF driver reload.
– Linux Driver: Reloading the Intel AVF driver clears VF mirrors ingress settings while both Physical Function (PF) and VF mirrors have been added.
– Linux Driver: Despite being added, PF egress or ingress mirrors still show as turned off.
– Linux Driver: Trunk settings have no effect on filtering traffic of host VLANs.
– Linux Driver: Allow broadcast (allow_bcast) option is not present in sysfs.
– Linux RDMA Driver: In RedHat 8.1, the i40iw driver does not compile.
– NVM Update Tool: The X722 adapter doesn’t allow for updates through other physical ports when dummy deviceId 0x37CC is detected at the first physical port. It’s not possible to swap between different OCP PHY modules.
– NVM Update Tool: On X710-T4L and X710-T4L for OCP 3.0 adapters, fast update executed by the NVM Update Tool with RESET TYPE: PHY entry in config file ends with PHY reset failed information and exit code 18.
– EFI Driver: Wake on LAN (WoL) settings can only be saved after a power cycle on X710 OCP3.0 adapters.
– Virtualization: SR-IOV is disconnected when 2.5G or 5G speed is set on X710TLG GbE RJ45 PCIe adapters.
Intel Ethernet 500 Series:
– EEupdate: EEupdate doesn’t provide information that changes of device ID and MAC addresses are locked.
– QoS Windows: Powershell command Get-NetAdapterQos does not show current setting after a firmware transition from non-willing to willing.
Intel Ethernet 200 Series
– EFI Driver: Intel Ethernet Controller I210 might not establish a link with probability of one failure per 1000 power cycles or even more. Such behavior can be observed only if power cycle is performed during D3 state.
Release 25.0 is the last release to support:
– Microsoft Windows 7
– Microsoft Windows Server 2008 R2
– Intel QSFP+ Configuration Utility (QCU)
– IOUtil
İndirme