Intel NUC RST Preinstall Sürücüsü 13.6.0.1002
Dosya tipi: Sürücüsü.
Işleti̇m Si̇stemi: Windows 7, Windows 8, Windows 8.1.
Dosya adı: STOR_Win7_8_8.1_13.6.0.1002_f6flpy-x86.zip.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Resolved Issues:
– IRST uninstaller doesn’t require rebooting.
Bu indirme aşağıda listelenen ürünler için geçerlidir:
– Intel NUC Board D34010WYB
– Intel NUC Board D54250WYB
– Intel NUC Board NUC5i3MYBE
– Intel NUC Board NUC5i5MYBE
– Intel NUC Kit D34010WYK
– Intel NUC Kit D54250WYK
– Intel NUC Kit NUC5i3MYHE
– Intel NUC Kit NUC5i3RYH
– Intel NUC Kit NUC5i3RYK
– Intel NUC Kit NUC5i5MYHE
– Intel NUC Kit NUC5i5RYH
– Intel NUC Kit NUC5i5RYK
– Intel NUC Kit NUC5i7RYH
Known Issues:
– The system displays two ODD icons after hotplug ODD
– Acceleration option not available when OS on SSD and PCIe SSD as pass through
– SUT goes to S5 abruptly during S4->S3->S4 cycle with RST caching config (Issue only with certain PCIe disk)
– Enabling SRT changes Device Manager Disk Drive Information
– BSoD 0xFC occur at F6 driver downgrade.
– RST 13.x drive returns wrong SSD model name if iSRT cache volume is created on it
– SUT takes more than 3 minutes to enter S4 under Win7.
– [HSW][SRT] 8.1 screen occurred when restart the unit after enable acceleration with full disk capacity on both Max/Enh modes
– System resume from S4 will hang up around few minutes issue with 2TB HDD
– Uninstaller screen words cut off in BRZL/PT(BZ) language Windows 7 with Resolution 1920X1080;125% DPI
– Driver: CE BSOD iastorA.sys occurs while uninstalling 13.5 on a 3rd Party Windows 8.1 OS
– UI – PCI-E SSD custom space defaults at 64 GB, even if the drive has less than 64 GB of space left
– SSD/HDD model name in Win7 Device Manager will be changed incorrectly after RST driver installed.
– UI: BSOD when clicking “Hide recovery disk files” actionable link with On request RRT Volume.
– UI: System drive is not displaying or being recognized in RST UI
– Iastor BSOD when auto rebuilding volume to the same port
– SRT filecopy performance much worse than HDD
– Sleep and PNP (disable and enable) with IO Before and After (Certification) on certain configurations
– UI Writeback Cache checkbox (Advanced tab) disabled during IRRT volume creation
– All expected TRIMs are not occurring on SRT
– “Offline” disk shows up as “Normal” after reinserting back into system while RAID 5(or RAID 10) is rebuilding and restarting system
– BSOD 9f occurs when certain PCIe-AHCI SSD is attached.
– After multiple iterations of Hybrid S3 or S4, the sleep utility tool indicates errors when RST driver is installed.
– OS Spindown of matrix RAID volumes causes hang
– SMART Event disk rebuilding after system reboot of successful Raid 1 creation
– internal_power_error (A0) BSOD with hybrid S3
– BSOD 0xD1 reported with inbox driver 12.0.1.1018
– No timeout for a device that does not enumerate and stalls the OS boot process
– Refresh issues when changing from Windows default theme to high contrast
– After configuring SRT and conducting Dirty Shutdowns error: Unable to find System Disk
– RST Driver – Test hangs while running Inquiry command on ODD
– SRT: Driver fails to enumerate an accelerated disk or volume during an F6 install if a system disk is already attached to the system
– UI reports Unknown status and incorrect sync mode after hot-removing the recovery disk of an IRRTm while the sync is initializing.
– WHQL: RST not compliant with Device.DevFund.Memory.DriverFootprint requirements for x86
– ZPODD power off timer does not reset upon receipt of CSMI I/O
İndirme