Dell Toshiba MG03SCA100/MG03SCA200/MG03SCA300/MG03SCA400 SAS Firmware DG02/A00
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Windows Server 2003, Windows Server 2008.
Dosya adı: SAS-Drive_Firmware_5YYKW_WN32_DG02_A00.EXE.
Bit: 32/64 Bit.
Li̇sans: Ücretsiz.
Açıklama
This release contains firmware version DG02 for Toshiba SAS 100GB, 200GB, 300GB and 400GB Hard Drives. Dell. Vendor model numbers MG03SCA100, MG03SCA200, MG03SCA300, and MG03SCA400.
Fixes & Enhancements
– Persistent Reservation Command response compliance with SPC4 and SBC3
Applies to
– TOSHIBA MG03SCA100 Series SAS 7.2K 3.5 1TB
– TOSHIBA MG03SCA200 Series SAS 7.2K 3.5 2TB
– TOSHIBA MG03SCA300 Series SAS 7.2K 3.5 3TB
– TOSHIBA MG03SCA400 Series SAS 7.2K 3.5 4TB
Installation instructions
1. Click the “Download Now” link to download the file.
2. When the File Download window appears, click “Save” to save the file to your hard drive.
Kurulum
1. Dosyayı indirdiğiniz konuma göz atın ve yeni dosyayı çift tıklayın.
2. İletişim penceresinde görüntülenen sürüm bilgilerini okuyun.
3. Devam etmeden önce iletişim penceresinde tanımlanan önkoşulları indirip yükleyin.
4. Kur düğmesine tıklayın.
5. Güncellemeyi gerçekleştirmek için kalan talimatları izleyin.
Important Information
This update will not run if any of the following conditions exist
1. Any Virtual Disk that is not optimal.
2. A RAID container that is performing a Background Initialization or Consistency Check.
3. A Rebuild, Resync, or copyback function is taking place.
4. A RAID set that is Partially Degraded or in a Degraded state.
This update will run on drives remaining in a RAID set that is in a Offline state.
There is an architectural constraint with Dell DUP HDD firmware update utility, related to system memory utilization, which is typically encountered on systems with minimal system memory, memory-intensive configurations, multiple RAID controllers, or memory-intensive applications. This issue is typically reported as – The operation was not successful because the device buffer write has failed. And will result in an aborted attempt to update firmware on the identified HDD. Error codes associated with this failure mode include 8009 and 8017. Once an error is detected, the update session is aborted. There is no data integrity or data availability risk associated with this issue. Subsequent attempts to update the HDD firmware may succeed, particularly if system resources are freed up.
İndirme