Buffalo TS4400D NAS Firmware 3.00
Dosya tipi: Firmware.
Işleti̇m Si̇stemi: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows Vista, Windows XP.
Dosya adı: ts5000_4000-300en.zip.
Bit: 64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Added and Modified Features:
– SNMP: Modified to support SNMPv3.
– SNMP: Modified to support more settings that can be acquired via SNMP protocol: Model name, Firmware version, Serial number, Checking whether newer firmware is released, Showing whether the function status is enabled or disabled
– Update the MIB file on your SNMP client software to the latest version.
– OpenSSL: Updated OpenSSL to the latest version.
Bug Fixes
– Replication: Fixed a bug where replication errors may have occurred when both virus scan and replication were enabled.
– Samba: Fixed a bug where the access-restricted folder reserved for admin users cannot be accessed after initializing settings.
– Samba: Modified to deal with Samba programming vulnerabilities (CVE-2014-0244 and CVE-2014-3493).
– System: Improved for more stable operation even when during high load file transfers.
Before updating the firmware:
– Do not turn off the TeraStation until the firmware update is complete and the “finished” message is displayed.
– USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them.
– Disconnect iSCSI volumes with the iSCSI Initiator before updating the firmware.
How to Update the Firmware:
– Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Exit all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open.
– If multiple TeraStations are connected to the network, select which TeraStation to update.
– Click ‘Update’ and enter the TeraStation’s administrator password.
– Click ‘OK’.
– It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don’t disconnect or power down the TeraStation until the update is finished.
– When the update is finished, a message will be displayed.
İndirme