ASUS VivoBook 14 X412FJC Intel Serial IO SPI Sürücüsü 30.100.1915.1 için Windows 10 64-bit
Dosya tipi: Sürücüsü.
Işleti̇m Si̇stemi: Windows 10.
Dosya adı: SPI_DCH_Intel_Win10_64_V3010019151.zip.
Bit: 64 Bit.
Li̇sans: Ücretsiz.
Açıklama
Temel Özellikler:
– Processor: Intel Core i7 10510U/8565U, i5 10210U/8265U, or i3 10110U/8145U Processor
– Memory: 4 GB DDR4 2400MHz SDRAM Onboard memory, up to 12 GB SDRAM
– Display: 14.0″ (16:9) LED-backlit FHD (1920×1080) 60Hz Anti-Glare IPS-level Panel with 45% NTSC with wide 178° viewing angles
– Graphics: NVIDIA GeForce MX230 , with 2GB GDDR5 VRAM
– Hard drive: 500GB/1TB 5400 rpm SATA HDD
– Solid state drive: 128GB/256GB SATA 3.0 M.2 SSD
– Keyboard: Chiclet keyboard (Optional), Illuminated chiclet keyboard(Optional)
– WebCam: HDWebcam
– Wi-Fi: Integrated Wi-Fi 5 (802.11 ac (2×2))
Bu paket, Intel Serial IO sürücüsünü kurmak için gereken dosyaları içerir. Takılıysa, güncelleme (üzerine yazma üzerine yükleme) sorunları çözebilir, yeni işlevler ekleyebilir veya mevcut olanları genişletebilir. Diğer işletim sistemleri de uyumlu olsa da, bu sürümün belirtilenlerin dışındaki platformlarda kullanılmasını önermiyoruz.
Driver Installation via Installer:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the “SetupSerialIO.exe” file.
– Right click on the executable and select ‘Run as administrator’ option from the menu to start the installer and then click on ‘Yes’ button in User Account Control pop-up window.
– You should see welcome screen with component details. Click ‘Next >’ button to continue the installation.
– Next, you should see license agreement screen. Please review the license agreement and if you accept the license terms then check the check-box on “I accept the terms in the license Agreement” and click on the “Next >” button to continue the installation.
– Next, you can select the folder location where the driver will be installed. By default, the driver will be installed in c:program FilesIntelIntel Serial IO. Click on “Next >” button to continue installation.
– Next, a list of driver components that will be installed by the installer is displayed. Click on ‘Next >’ button to continue.
– After successful installation, you should see setup completion screen. Click on ‘Finish’ button to complete the installation.
Silent Driver Installation via Installer
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Open a Command Prompt (cmd.exe) with administrator rights (ie. Run as administrator). Click on ‘Yes’ button in User Account Control pop-up window.
– Change the directory to where you unzipped the driver in Step 1 and then change to the “Driver_Installer” directory.
– To see all available options for the Installer, run command “SetupSerialIO.exe -?”
– You should see a window pop-up. For the “-l <LCID>” option which specifies the language of the setup dialogs, the LCID list is shown in below table. Click OK to continue.
– Run command “SetupSerialIO.exe –b –s” to start the silent installation. (Where as x represents the particular version number.) This process should take about 1 min to complete. When silent installation is complete, the system will automatically reboot.
– After the system has booted, you can refer to section 0 to check the driver version.
Manual Installation via INF File:
– Copy and unzip the Intel Serial IO Driver onto the Platform under test.
– Locate the INF files. (iaLPSS_GPIO.inf, iaLPSS_I2C.inf, iaLPSS_SPI.inf, iaLPSS_UART2.inf)
– Right click on the INF file and select ‘Install’ option from the menu to start the installation and then click on ‘Yes’ button in pop-up window.
– After the installation of all the drivers, reboot the system.
İndirme