ZOOM G3n Multi-Effects Pedals Firmware 2.00
Tipo de arquivo: Firmware.
Sistema operacional: Mac, Windows 10, Windows 8, Windows 8.1.
Nome do arquivo: G3n_v2.00_Mac_E_0.zip.
Bit: 64 Bit.
Licença: Grátis.
Descrição
Alterar:
1. Supports Guitar Lab version3.
2. Improved the encoder operation.
3. Added OutputVP that takes over the volume setting when switching patches.
4. Added effects already distributed online.
Installing the standard Windows driver on the computer:
– Connect the G3n to the computer using a USB cable. If you connect to a USB port that is different from the one that you used when installing the Windows standard driver previously, “Driver Software Installation” will appear.
– After a short time, the standard driver installation will complete.
Updating the firmware
1. Use a USB cable to connect the G3n to a computer.
2. While pressing both FS1 and FS2, turn the POWER switch ON.
2.1. NOTE: The firmware update requires the standard driver.
3. Double-click the firmware update application icon to launch.
4. With a G3n, click the “MIDI IN” and “MIDI OUT” fields to open lists of MIDI devices and select “ZOOM G Series” for both. If nothing is shown in the fields, click [Rescan Device] button.
5. Click the [Execute] button to start the firmware update.
5.1. Do not disconnect the USB cable while the firmware is being updated. In the unlikely event that a firmware update should fail, follow the procedures from the beginning to update the firmware again.
6. When the firmware update completes, click the [Exit] button to close the firmware update application. Then, turn the G3n power off. This completes the firmware update.
Download