Yamaha M7CL V2 Digital Mixer Firmware 2.03
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: m7clv2_frm203.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Este pacote fornece os arquivos de instalação necessários do Yamaha M7CL V2 Digital Mixer Firmware 2.03.
Correções:
– Fixed a problem in which “DEFINE” would not appear in the PARAMETER2 area of the User Defined Keys Setup window even when MONITOR ->SOURCE SELECT ->DEFINE was assigned to the key.
– Fixed a problem in which LIBRARY button would not be grayed-out in the Selected Channel Additional View window (Locked mode).
Etapas de instalação:
1. Turn off the power to the M7CL.
2. Connect the USB storage device to the M7CL USB connector, then turn on the power to the M7CL. A “Start Loading ?” message will be displayed.
3. Click the OK button to start loading the firmware.
CAUTION: A “Loading…” message will appear during loading the firmware. The indication “……” will be displayed during the loading progress. Do not disconnect the USB storage device or power-off the M7CL while accessing the USB storage device.
4. When the firmware has been loaded, the M7CL automatically restarts and a “Starting System…” message flashes for approximately one minute. While this message is flashing, do not turn off the power. If you have accidentally turned off the power, turn on the power again to resume the initialization.
5. When a “Since M7CL was upgraded, Initialize all memories” popup window (or similar message) appears, press the CLOSE button to close it.
6. When an “Initialize All Memories ?” message appears, press the INITIALIZE button.
7. When an “Are you sure ?” message appears, press the OK button. Initializing the internal memory will be started.
8. When the initialization is complete, press the EXIT button.
9. Remove the USB storage device after confirming the ACCESS indicator has disappeared in the function access area.
10. If necessary, confirm the firmware was correctly updated in the version field in the SETUP screen. Also, adjust the detection point of the touch screen (Calibration function) on the startup menu screen. Restart the M7CL first to adjust the faders (Calibration function).
Download