Ubiquiti NB-5G22 Antenna Firmware 6.0.30097.161219
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: XM.v6.0.30097.161219.1716.bin.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Nota importante:
– Version 6.0 is recommended for PTMP Mixed mode usage (M clients connected to AC AP)
Novo:
– New: airMAX AC client mode support (AP must be upgraded to airOS8 and PTMP Mixed mode selected)
– New: Don’t do full restart on most configuration changes
– New: Added signal per chain reporting for AirControl v2
– New: Add kernel crashlog into Support info for better troubleshooting
– New: Added Crash log reporting to Ubiquiti Networks for better troubleshooting
– New: Added “default-mru” key in ppp/options file to disable MRU negotiation
– New: Added MRU negotiation Enable/Disable option
– New: Store configuration backup if upgrade fixer is changing it
– New: Enable Block management access on WAN when switching to Router mode
– New: Dynamic DNS configuration via system.cfg
– New: Added option allowing LLDP packets to pass wireless bridge
– New: DHCP Option configuration via system.cfg
– New: Update dropbear to v2016.74
– New: OpenSSL update to v1.0.2h
– New: lighttpd update to v1.4.39
– New: Linux kernel update to v2.6.32.71
Regulatory Updates:
– ETSI EN 301 893 v1.8.1 adaptivity improvements
– Update 5GHz band for China: add 5180-5240MHz and 5260-5320MHz channels
– Revised UNII Rules activation for NanoStation M5, NanoStation Loco M5 and LiteBeam M5 23
Melhorias:
– Reduce false positives and misclassifications of invalid DFS radar events
– airMAX security improvements
– MAC authentication process improvement while RADIUS server is not reachable
– Various vulnerability/security changes
– Stability improvements
– Performance issue when XM device runs out of memory
Correções:
– Fix: Set CPU speed to 400MHz to eliminate out of band emission for Verizon (XM series)
– Fix: AP drops stations when another AP with the same SSID is running on the same frequency
– Fix: Stability fixes (random AP/Station reboots)
– Fix: RADIUS MAC Authentication fails in case server isn’t reachable
– Fix: Can’t SSH to Mikrotik devices
– Fix: Do not load NAT helpers modules when NAT is disabled
– Fix: DNS Proxy binds not just to LAN but to WAN port also
– Fix: MSS Clamping for PPPoE is not enabled when Management VLAN is configured
– Fix: Generate unique SSL certificate for each device
– Fix: Generate SSL certificate start date from firmware build timestamp
– Fix: Crontab does not work with multiple scheduler/commands
– Fix: AirMax Capacity reports over 100 percent with Legacy devices
– Fix: Site Survey doesn’t report full list of available APs
– Fix: Show full EdgeSwitch firmware version in Device Discovery
– Fix: Device Name with not allowed symbols breaks DHCP
– Fix: Impossible to log in with SSH authorisation keys
– Fix: French language translation issue
– Fix: Change antenna reporting to Chain0/Chain1 instead of Vertical/Horizontal for all Rocket models
– Fix: Wrong TX Power reporting from command line “iwlist ath0 txpower” (XW)
– Fix: DHCPv6 doesn’t after PPPoE session reinitialisation
– Fix: Revised UNII Rules activation/deactivation for products manufactured after 06/01/2016 (due to changes in the FCC rules)
– WEB UI: Updated Chinese translation
– WEB UI: More statistics on Main page (CPU/Memory usage)
– WEB UI: Added DFS Events monitoring list on the Main page
– WEB UI: Switch antenna Chain0/Chain1 mapping to Horizontal/Vertical for PowerBeams
Download