Tenvis ROBOT3 (Rev.1.0.0.1) Network Camera Firmware 13.1.1.1.7.2
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: B18TV_V13.1.1.1.7.2-20151211(720P.factory.云台机).pkg.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Este pacote fornece os arquivos de instalação necessários da versão do Tenvis ROBOT3 Network Camera Firmware 13.1.1.1.7.2.
Notícia importante:
– Any upgrading has some potential risk, we don’t suggest you upgrade if there has no big problem on your camera.We may not have the original firmware to provide you to downgrade firmware if you regret upgrading. Hope you understand.
1. Some models have multiple hardware versions and firmware version. Please verify the firmware version of your device. It can only upgrade firmware for the same hardware version. Wrong firmware upgrading may damage your device and avoid the warranty.
2. For some camera models, upgrade firmware may has the risk of losing camera UID and DDNS, please think twice
3. Do NOT upgrade the firmware via wireless connection
4. Do NOT turn off the power or cut down the Ethernet cable during upgrade process
5. Internet Explorer(IE) is recommended to upgrade the firmware
6. Please unzip the firmware if it is a zip file
Etapas de instalação:
1. Salve o pacote para download.
2. Log into the network camera’s web user interface.
3. Navigate to the “System config” section.
4. In “System Update” section, click “Browse” and choose the firmware suitable for your camera.
5. Click “Upgrade” and wait as the device carries out the upgrade process.
6. Reinicie a unidade, se necessário.
Download