TBS Matrix 2 ARM Mini PC Firmware Android 4.4.2-3.0
Tipo de arquivo: Firmware.
Sistema operacional: .
Nome do arquivo: TBS2980-0720.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
How to update (It is recommended to use the first way to upgrade)
1. Via USB stick (recommended)
– Prepare an USB stick (FAT format).
– If you don’t have the firmware/ system files ready, download them from our website, and copy the file ” jaws_tvd_p1-ota-20150720.zip” to the USB stick.
– Connect the USB stick to Matrix 2 when the device is powered on.
– On homepage of the Android UI, click on the APP “system update”, and then click “local update”, select the update file ” jaws_tvd_p1-ota-20150720.zip” from the USB stick and start to update, the process might take a few minutes.
– When the update is complete, Matrix 2 will reboot into the new system.
2. Via PC
– If you don’t have the firmware/ system files ready, download them from our website, and save the file “sun9iw1p1_android_jaws-p1_uart0.img” to your PC, and download PhoenixSuit tool using the URL: How to update (It is recommended to use the first way to upgrade)
1. Via USB stick (recommended)
– Prepare an USB stick (FAT format).
– If you don’t have the firmware/ system files ready, download them from our website, and copy the file ” jaws_tvd_p1-ota-20150720.zip” to the USB stick.
– Connect the USB stick to Matrix 2 when the device is powered on.
– On homepage of the Android UI, click on the APP “system update”, and then click “local update”, select the update file ” jaws_tvd_p1-ota-20150720.zip” from the USB stick and start to update, the process might take a few minutes.
– When the update is complete, Matrix 2 will reboot into the new system.
2. Via PC
– If you don’t have the firmware/ system files ready, download them from our website, and save the file “sun9iw1p1_android_jaws-p1_uart0.img” to your PC, and download PhoenixSuit tool
– Use an USB cable (male to male) to the connect Matrix through the USB3.0 port (is blue) (Note: USB 2.0 port cannot be used in this way to update) to a PC.
– Use a small pin to insert to the hole of A/V (switch Matrix to “burn” mode), at the same time power on Matrix 2, hold the pin until the blue LED light is on.
– Install PhoenixSuit on the PC (you can also use some other software). Start it, click “Firmware”, select the image file “sun9iw1p1_android_jaws-p1_uart0.img” from your PC, then click on “Upgrade” to process the update, it will take a few minutes.
– When the update is complete, Matrix 2 will reboot into the new system.
– Use an USB cable (male to male) to the connect Matrix through the USB3.0 port (is blue) (Note: USB 2.0 port cannot be used in this way to update) to a PC.
– Use a small pin to insert to the hole of A/V (switch Matrix to “burn” mode), at the same time power on Matrix 2, hold the pin until the blue LED light is on.
– Install PhoenixSuit on the PC (you can also use some other software). Start it, click “Firmware”, select the image file “sun9iw1p1_android_jaws-p1_uart0.img” from your PC, then click on “Upgrade” to process the update, it will take a few minutes.
– When the update is complete, Matrix 2 will reboot into the new system.
Download