Point Grey Blackfly PGE Camera Firmware 1.27.3.10
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: Blackfly-1.27.3.10.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Firmware update:
1. Install FlyCapture2 for either windows or linux.
2. Plug your camera(s) in. Cameras must show up in FlyCapture2. If they do not show up, install FlyCapture2.X and the associated drivers (if applicable) and ensure cameras are visible in FlyCap2 demo.
3. Run UpdatorGUI2.exe or UpdatorGUI3.exe (depending on version of FlyCapture2.X) installed in your bin/bin64 folder:
On 32 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin
On 64 bit Windows: C:\Program Files\Point Grey Research\FlyCapture2\bin64
4. Select the camera(s) to update, point to the .ezm2 file downloaded with this package, and select “Update”.
Camera(s) should now be updated. Please note a power cycle of the cameras should not be required, as they are automatically rebooted after firmware update.
Fixes
:
Resolved Issues:
26570 – No image image arrive for 10-30 seconds after changing frame rate or video settings
ERRATA LIST (list of known issues with this version):
26888 – Manual shutter setting ignored by camera if framerate is off
26880 – NI-MAX Unable to change the frame rate (PoE-Core V1.2)
26878 – NI-MAX default AutoGainUpperLimit value is higher than the maximum (PoE-Core V1.2)
26635 – Invalid initial ChunkSelector value prevents streaming in NI-MAX (PoE-Core V1.2)
24435 – BFLY-PGE-13E4M/C: pixel shifts in 2×2 binning modes
24432 – BFLY-PGE-13E4M/C: Requested frame rate is not achieved in some settings
24356 – BFLY ICX445/693/692 pixel shifts in binned modes (PoE-Core V1.2)
Download