Panasonic WV-NF284 Network Camera Firmware (CN) 1.64
Tipo de arquivo: Firmware.
Sistema operacional: Windows 7, Windows Vista, Windows XP.
Nome do arquivo: nf284_164E0.zip.
Bit: 64 Bit.
Licença: Grátis.
Descrição
Especificações:
– MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips
– MPEG-4 and JPEG dual stream output for simultaneous real time monitoring and high resolution recording
– Progressive output provides clear images, even when the subject is moving.
– High sensitivity: 1.5 lux at F1.3 (Wide)
– Electronic sensitivity enhancement: Auto (Up to 16x) / OFF
– Electronic shutter for anti flicker
– 2.8 ~ 10 mm, 3.6x Varifocal Auto Iris lens
– VMD (Video Motion Detector) with 4 programmable detection areas and 6 sensitivity levels
– Meta data for VMD is supplied to work with the WJ-ND400 playback VMD function.
– Monitor output for easier installation
– Up to 3x digital zoom controlled by browser
– Camera title display: Up to 20 alphanumeric characters on browser
– SD Memory card slot for alarm recording and backup upon network failure. Recorded data can be downloaded by using FTP command.
– Alarm sources including Terminal input, VMD and Panasonic alarm command can trigger actions including SD memory recording/FTP image transfer, E-mail notification, Alarm indication, Terminal output and Panasonic protocol output.
– Built-in microphone for audio (1-way)
– Built-in network interface (10Base-T / 100Base-TX)
– Power over Ethernet (PoE) IEEE 802.3af.
– Multiscreen: Images from 8 cameras can be displayed in 2 separate Quad screens (JPEG only). 20 characters camera title is available for each camera.
– FTP client function enables periodic image data transfer or transfer upon alarm.
– Alarm e-mail notification
– Max. bit rate/client (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 / 3,072 / 4,096 kbps) or frame rate priority mode (4,096 kbps / Unlimited) for MPEG-4 and Total bit rate control (64 / 128 / 256 / 512 / 1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.
– Supported Protocol: TCP/IP, UDP/IP, HTTP, RTSP, RTP, RTP/RTCP, FTP, SMTP, DHCP, DNS, DDNS, NTP, SNMP
– Internet mode: MPEG-4 images can be transmitted over HTTP protocol.
– Multi-language GUI and setup menu: English, French, Italian, Spanish, German, Russian (PAL) / English, French (NTSC)
Download