Panasonic AG-DVX200MC Camcorder Firmware 1.84
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: TC58NYG0N15T.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Melhorias:
– On rare occasions, the operation of REC button on the unit or a wired remote control may no longer have any effect. This problem is fixed.
– If the card is ejected from the main slot during the simultaneous recording, the recording in the sub-slot stops 10 hours after the start of recording. The indication shows the same as during recording, and the operations of REC button are refused. This problem is fixed.
– LCD may not show anything when the camera is booted up. This problem is fixed.
– A very few SD cards may have a write error. This problem is fixed.
– If the network address is changed when WIRELESS SETUP is set to [DIRECT] and DHCP is set to [SERVER], it sometimes made the camera impossible to connect to the iPad. This problem is fixed.
– If SET button is operated on AG-ROP app, the count number of “Jog Dial” item of Hour Meter is increased. This problem is fixed.
– When 480i squeeze output is carried out, an image quality may be the slight deterioration. This problem is fixed. (Recording signals do not have any problem, only output signals have this problem.)
Update procedure:
– Ligue a energia. Set the MODE SW to RECORDING side.
– Insira o cartão de memória SD no slot de cartão de memória SD 1.
– Press the MENU button to display the setting menu.
– Select the item “UPDATE” on the MAINTENANCE menu. (Touch “UPDATE”.)
– It takes a few seconds to check the file. While checking it, the message “Please wait.” is displayed. Se a atualização puder ser executada, as versões do gravador da câmera e o arquivo de atualização no cartão SD serão exibidos.
– Select the “ENTER” button. (Touch the “ENTER” button.)
– The update confirmation screen is displayed. When “YES” is selected, the update process will start. (Touch the “YES” button.) When “NO” is selected, the screen will return to the OTHER FUNCTION menu screen.
– A barra de progresso aparece na tela LCD ao mudar para o processamento de atualização.
– Software update takes approx. 1 to 2min. Não desligue enquanto atualiza.
– When the update is completed, the power automatically turns OFF / ON and the message “Update is completed.” is displayed. After the power is ON again, Status indicator is ON.
– Select the “OK” button. (Touch the “OK” button.) A tela normal do modo “Gravação” é exibida.
Download