NETGEAR R6400v2 Router Firmware 1.0.4.78
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: R6400v2-V1.0.4.78_10.0.55.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
New Features:
– Supports NETGEAR Armor.
Bug Correções:
– Fixes some minor bugs.
New Features & Enhancements:
– Modifies the router web interface to support DDNS GDPR v3.
– Includes a new NETGEAR banner logo.
– Removes Step 1 from the ReadySHARE Vault page in the router web interface, which asked to install the genie app.
– The http request will not be redirected when the router detects a WAN/LAN IP conflict in the blank state.
– Updates dnsmasq to V2.78.
Firmware Upgrade Instruction
– Note: To avoid wireless disconnect issues during the firmware download process, NETGEAR recommends that the firmware upgrade be performed on a computer with a wired connection.
– Write down all the settings that were changed from the default values as you may need to re-enter them manually.
– Download and extract the new firmware to a convenient place such as your desktop.
– Log in to the router using a Web browser.
– Click ADVANCED tab > Administration > Firmware Upgrade.
– Click Browse and find the file you just downloaded.
– Click Upload. Do not interrupt the upgrade while the router does this step.
Nota importante:
– The upgrade process is complete when the on screen progress bar completes. If the power LED light turns amber and blinks, power cycle the router to complete the upgrade.
– If the upgrade progress bar on web GUI doesn’t display correctly during the firmware upgrade, you can still check the status using the Power LED. The Power LED should be blinking (amber) during firmware upgrade. After the firmware upgrade is complete and the system boots up, it changes to a steady amber color.
– Please DO NOT power off or reboot the device during the firmware upgrade, otherwise, it may result in corrupt firmware and cause the device not to work.
Download