MikroTik RouterOS MMIPS Firmware 6.46 RC 38
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: all_packages-mmips-6.46beta38.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Alterações nesta versão:
– btest – removed duplicate “duration” parameter;
– console – added bitwise operator support for “ip6” data type;
– console – fixed IP conversation to “num” data type;
– console – properly detect IPv6 address as “ip6” data type;
– crs312 – fixed combo SFP port toggling (introduced in v6.44.5);
– crs3xx – fixed “egress-rate” property on CRS309-1G-8S+, CRS312-4C+8XG, CRS326-24S+2Q+ devices;
– dot1x – added “reject-vlan-id” server parameter (CLI only);
– dot1x – added support for “mac-auth” authentication type (CLI only);
– qsfp – clear SFP monitoring data on port enable;
– qsfp – correctly display SFP monitoring data;
– qsfp – fixed EEPROM checksum validation;
– radius – fixed open socket leak when invalid packet is received (introduced in v6.44);
– supout – removed “file” option from “/system sup-output” command;
– wireless – added 4 chain MCS support for 802.11n wireless protocol (CLI only);
– wireless – fixed RX chain selection;
– wireless – include last frequency when manually setting frequency step in “scan-list”;
Other changes since v6.45.5:
– bonding – correctly remove HW offloaded bonding with ARP monitoring;
– bonding – properly handle MAC addresses when bonding WLAN interfaces;
– bridge – disable/enable bridge port when setting bpdu-guard;
– bridge – do not add bridge as untagged VLAN member when frame-types=admit-only-vlan-tagged;
– capsman – improved DFS channel switching when radar detected;
– certificate – improved CRL updating process;
– conntrack – properly start manually enabled connection tracking;
– crs3xx – correctly handle L2MTU change;
– crs3xx – remove previously set mirror-source property before changing it;
– defconf – require “policy” permission to print default configuration;
– dhcpv6-server – include “User-Name” parameter in accounting requests;
– dhcpv6-server – made “calling-station-id” contain MAC address if DUID contains it;
– dot1x – added support for “mac-auth” authentication type (CLI only);
– ethernet – automatically detect interface when using IP address for power-cycle-ping;
– ethernet – send requests only from ethernet interface when using MAC address for power-cycle-ping;
– fetch – improved stability when processing large output data;
– gps – use “serial1” as default port on RBLtAP-2HnD;
– hotspot – fixed non-local NAT redirection to port TCP/64873;
– hotspot – fixed RADIUS CoA “address-list” update;
– ike1 – fixed minor spelling mistake in logs;
– ike2 – fixed IPv6 policy generation (introduced in v6.46beta28);
– ipsec – added “error” topic for identity check failure logging messages;
– ipsec – fixed DNS resolving when domain has only AAAA entries;
– log – increased log message length limit to 1024 characters;
– lte – do not allow setting 3G and GSM modes on LTE only modems;
– lte – fixed band setting on R11e-4G;
– lte – fixed network registration on R11e-LTE-US;
– lte – fixed USB network device driver initialization (introduced in v6.46beta9);
– lte – show “primary-band” only for LTE modems;
– lte – use /128 prefix for IPv6 address on LTE interface;
– lte – use interface from RA when “ipv6-interface=none” and IPv6 enabled;
– ppp – added 3GPP IoT “access-technology” definitions;
– ppp – added support for Sierra WP7601;
– ppp – disable DTR send when using at-chat;
– qsfp – show more QSFP module diagnostics;
– quickset – added “LTE AP Dual” mode support;
– routerboard – fixed default CPU frequency on RB750r2 (“/system routerboard upgrade” required);
– snmp – fixed “radio-name” (mtxrWlRtabRadioName) OID support;
– switch – correctly update dynamic switch rule when dhcp-snooping is enabled;
– tr069-client – added LTE band and cellular technology selection parameters;
– tr069-client – added LTE RSCP, ECNO and ICCID parameter support;
– tr069-client – added multiple LTE monitoring parameters;
– tr069-client – reconnect to ACS when “ConnectionRequestURL” is updated;
– usb – general USB modem stability improvements;
– userman – updated Authorize.Net to use SHA512 hashing;
– w60g – added “region” setting to limit allowed frequencies (CLI only);
– webfig – fixed link to Winbox download;
– winbox – added “ip-address” and stats columns in “IP/Kid-Control/Devices” menu;
– winbox – added “public-address-ipv6” parameter to “IP/Cloud” menu;
– winbox – added “reset-counters” button to “IP/Kid Control/Devices” menu;
– winbox – added “tx-info-field” parameter to “Wireless/W60G” menu;
– winbox – added “Vendor Classes” tab in “IP/DHCP Server” menu;
– winbox – added wireless alignment LED types to “System/LEDs” menu;
– winbox – fixed allowed range for bridge filter “new-priority” parameter;
– winbox – fixed “cluster-id” parameter setting in “Routing/BGP/Instances” menu;
– winbox – fixed file locking when uploading multiple files at once;
– winbox – fixed firewall limit parameter support for rates more than 4G;
– winbox – fixed invalid flag presence in “IP/SMB/Shares” menu;
– winbox – fixed “Routing” menu icon presence when there is no routing package installed;
– winbox – improved stability when transfering multiple files between multiple windows;
– winbox – properly show timestamp in file “Creation Time” field;
– winbox – removed “Set CA Passphrase” button from “Certificate” menu;
– winbox – renamed “Queue Limit” to “Queue Size” for “pcq-upload-default” and “pcq-download-default” parameters;
– winbox – replaced “kb” with “KiB” in “Tools/Packet Sniffer” menu;
– winbox – show “Switch” menu on RBwAPGR-5HacD2HnD;
– winbox – show “System/RouterBOARD/Mode Button” on devices that have such feature;
– wireless – fixed 802.11n rate selection when managed by CAPsMAN;
– wireless – improved 802.11ac stability for all ARM devices with wireless;
– wireless – updated “ukraine” regulatory domain information;
Download