MikroTik RouterOS ARM64 Firmware 6.46.7
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: all_packages-arm64-6.46.7.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Important note!!!
– The Dude server must be updated to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.
– The Dude client must be manually upgraded after upgrading The Dude server.
– The Dude requires “winbox” policy instead of “dude” to monitor v6.46.4+ and v6.47beta30+ RouterOS type devices.
Changes since 6.46.6:
– arm – improved stability when forcing 25G speed on unsupported interface;
– bridge – fixed host table update on SNMP query;
– bridge – fixed STP alternate and backup port states for devices with switch chip;
– crs3xx – fixed hardware offloaded MPLS forwarding when using bonding interfaces;
– crs3xx – fixed QSFP+ interface LEDs when using break-out cable for CRS326-24S+2Q+;
– crs3xx – fixed switch ACL rules for CRS312, CRS326-24S+2Q+ and CRS354 devices;
– crs3xx – fixed switch port “egress-rate” removal for CRS305, CRS326-24G-2S+, CRS328, CRS318 devices;
– crs3xx – improved 10G interface initialization on CRS312 devices;
– crs3xx – improved Ethernet port group traffic forwarding on CRS354 devices;
– crs3xx – improved system stability when using hardware offloaded MPLS;
– defconf – fixed default configuration loading on RBmAPL-2nD;
– dhcpv6-server – disallow changing binding’s “prefix-pool”;
– dhcpv6-server – do not require “server” parameter for bindings;
– discovery – do not send discovery packets on inactive bonding slave interfaces;
– discovery – do not send discovery packets on interfaces that are blocked by STP;
– dot1x – fixed duplicate EAP request packets for server;
– dot1x – fixed EAP packet version numbering;
– email – added support for multiple “to” recipients;
– export – fixed HotSpot “address-per-mac” parameter export;
– fetch – show status “uploaded” instead of “downloaded” when uploading a file;
– ftp – fixed possible buffer overflow;
– hotspot – ignore packets from host while MAC authentication is in progress;
– ike1 – improved stability when performing policy lookup on non-existant peer;
– ike2 – fixed local side NAT detection;
– ike2 – fixed policy reference for pending acquire;
– ike2 – retry RSA signature validation with deduced digest from certificate;
– interface – added new builtin “static” interface list;
– kidcontrol – fixed “time-unlimited-rate” to engage in correct time;
– lcd – improved general system stability when LCD is not present;
– lte – fixed modem initialization when multiple modems are used simultaneously;
– lte – fixed PDP authentication configuration for SIM7600;
– lte – improved stability during firmware upgrade;
– metarouter – fixed image importing (introduced in v6.46);
– ospf – fixed disappearing NSSA default route;
– ospf – fixed processing of “unknown” LSA type;
– ospf – improved route tag processing for OSPFv3;
– poe – fixed “power-cycle” functionality on hEX PoE, PowerBox Pro and OmniTIK 5 PoE ac;
– port – removed serial console port on hEX S;
– ppp – removed “comment”, “set” and “edit” commands from “PPP->Active” menu;
– profile – added support for CCR2004-1G-12S+2XS;
– qsfp – fixed auto-negotiation status;
– quickset – fixed invalid configuration applying when performing changes during LTE modem initialization process;
– quickset – show “Antenna Gain” setting on devices without built-in antennas;
– route – improved stability when 6to4 interface is configured with disabled IPv6 package;
– routerboard – fixed “reset-button” menu presence on all devices;
– routerboot – fixed etherboot FCS errors with 100Mbps rate for CRS305, CRS309 and CRS317 devices (“/system routerboard upgrade” required);
– sfp – stabilized CRS212 SFP port functionality and improved monitoring of optical modules;
– smb – fixed file path validation (introduced in v6.46);
– smb – fixed possible memory leak;
– smb – limit active session count to 5 per connection;
– sniffer – allow setting port for “streaming-server”;
– snmp – added “dot1qTpFdbTable” OID reporting for Q-BRIDGE-MIB;
– switch – correctly enable and disable CPU Flow Control on RB3011UiAS;
– switch – fixed MAC address learning on switch-cpu port for Atheros8316, Atheros8227 and Atheros7240 switch chips;
– upgrade – fixed space handling in package file names;
– w60g – added “mdmg-fix” parameter for RBwAP60Gx3 (CLI only);
– w60g – improved rate selection in low traffic conditions;
– webfig – fixed 5 GHz wireless interface “frequency” parameter value list on Audience;
– winbox – added “region” parameter for W60G interfaces;
– winbox – allow to specify any Ethernet like interface under “Tool/WoL” menu;
– winbox – do not allow to enter empty strings in “caps-man-names” and “common-name” parameters;
– winbox – fixed “Tx/Rx Signal Strength” value presence for 4 chain interfaces;
– winbox – fixed wireless interface “HT” tab setting presence when “band=5ghz-n/ac”;
– winbox – fixed wireless sniffer parameter setting;
– winbox – hide irrelevant switch port parameters;
– wireless – added support for U-NII-2 for cAP ac;
– wireless – added support for U-NII-2 for wAP ac;
– wireless – allow setting “tx-power” up to 40;
– wireless – changed “station-roaming” default setting from “enabled” to “disabled”;
– wireless – fixed potential wireless driver issue related to CVE-2020-3702;
– wireless – improved management service stability when receiving bogus packets;
– wireless – updated “bangladesh” regulatory domain information;
– wireless – updated “canada” regulatory domain information;
– wireless – updated “egypt” regulatory domain information;
– wireless – updated “indonesia5” regulatory domain information;
– wireless – updated “united states” regulatory domain information;
– www – added “tls-version” parameter in “IP->Services” menu;
Download