Kramer VP-731 Presentation Scaler-Switcher Firmware 1.06 Master
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: vp-730_731_master_firmware_upgrade_ver._1.06.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Firmware Upgrade Procedure
1. Acquire xxx.brec file with the required version of firmware.
2. Copy this file to the route directory on any USB readable memory device (disk-on-key, flash memory card etc.).
3. Plug the device with the firmware file into USB connector of the VP728/729 and switch osan the scaler.
4. Wait until the scaler boots up and then use OSD menu to navigate to Setup>Advanced Setup>Misc>Firmware Download
5. Use UP and DOWN arrows to highlight the required firmware file and press ENTER button.
6. Confirm the upgrade and wait until progress indicator gets to 100%.
7. Restart the scaler by recycling the power.
Download