Intel R2208WTTYC1 Server System BIOS/Firmware 01.01.1029
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: S2600WT_EFI_BIOS_R01.01.1029_ME_030103072_BMC_0161r12390_FRUSDR_119.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Versões:
– System BIOS – 01.01.1029
– ME Firmware – 03.01.03.072
– BMC Firmware – 01.61.12390
– FRUSDR – 01.19
BIOS 01.01.1029 Changes:
– Failed to set BIOS Knobs using syscfg /bcs and syscfg /r only in OS level.
BMC Firmware 1.61.12390 Changes:
– 2103633529:[BMC]The “KVM &Media” and “SMASH CLP port” values is empty if checked by user privilege.
– 2103633537:[BMC] Hot key “Alt+R” is no function under full screen mode with iKVM.
– Fix BDBA reported kernel CVEs that cannot be triaged.
ME Firmware 03.01.03.072 Changes:
– QSR PSIRT-TA-201901-002
FRUSDR 01.19 Changes:
– Add KCS Ctrl Mode sensor.
Update new FRUSDR utility (FRUSDR_V14_1_Build18_AllOS).
BIOS RECOVERY INSTRUCTIONS
1. Power OFF the system
2. Switch the recovery jumper. Details regarding the jumper ID and location
can be obtained from the Server Board TPS for that Platform
3. Power ON the system
4. The BIOS POST screen will appear displaying the progress and the system
will automatically boot to the EFI SHELL
5. Follow the BIOS recovery update manual for BIOS recovery.
Update Procedure
– Unzip the contents of the update package and copy all files to the root directory on a USB flash drive
– Insert the USB flash drive to any available USB port on the server system to be updated
– Power on the server
– The system will automatically access the uEFI shell and begin the update process.
Or
– If the files were copied to a folder other than the root, Boot the Server to
the uEFI shell. This can be accessed via the <F2> BIOS setup utility during
POST or via the <F6> Boot Menu accessed during POST.
– Run the command “map -r” in the uEFI shell to mount the USB flash drive
– Run the command “fs0:” to change folders to the USB flash drive. The USB
flash drive may also mount to fs1: depending on other installed devices. The
number of “fs#” is dependent on the result of command “map -r”
– Change folders to the folder holding the update package files and manually
start the “Startup.nsh” script file to start loading all updates
– Reboot the system after the update process has successfully completed
Verifying Updates:
– During POST, hit the <F2> Key when prompted to access the BIOS Setup Utility
– From the BIOS Setup Utility main menu, Hit the <F9> key to load BIOS Defaults
– At the MAIN menu verify the BIOS revision is correct
– Move cursor to the SERVER MANAGEMENT Menu
– Move cursor down to the SYSTEM INFORMATION Option and hit Enter
– Verify the BMC Firmware revision is correct
– Verify the SDR revision is correct
– Verify the ME Firmware revision is correct
– Configure desired BIOS Option settings
– Hit the F10 Key to save changes and Exit
Download