GitUp GIT2 Action Camera Firmware 1.6
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: Git2_FW_V1.6.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Change log:
1. Added: Support Image Rotation
2. Added: Update settings from configuration file
3. Added: Photo Shutter Speed Options: 1/2000sec, 1/1000sec, 1/500sec, 1/250sec, 1/125sec
4. Added: New Wi-Fi command for time-lapse, self-timer, etc.
5. Added: Front LED On only option
6. Added: Support mode/menu button to enable quick function
7. Added: Support turn off screen via mode/menu button
8. Improved: Default setting time is same as firmware released time.
9. Improved: No frame drop in 1080P 60fps at low light condition.
10. Improved: Update IQ
Etapas de instalação:
1. Use max. 32GB card formatted by camera or on computer as FAT32
2. Insert card in camera and connect it to computer using USB cable
3. Copy just the GIT2LD.bin on the root of the card
4. After GIT2LD.bin is copied to the card disconnect the camera from computer
5. Reconnect the camera to your computer and wait few seconds until you can chose Mass Storage from camera menu
6. Delete GIT2LD.bin from the card using your PC and
7. Copy the GIT2FW.bin file on the root of the card
8. Reconnect the camera to your computer and wait more seconds until you can chose Mass Storage from camera menu, the front green LED and back red LED will be blinking while upgrading.
How to connect Git2 with the wireless router?
1. Set the Wi-Fi mode on AP mode
2. Put the client.txt file in the SD card root directory, change the SSID and password
3. If set the Wi-Fi auto start option as off, you need long press the Wi-Fi button to enable the Wi-Fi and then connect the router automatically.
4. If set the Wi-Fi auto start option as on, it will connect with router automatically after powered on.
Note:
For the Wi-Fi AP mode, if you set the Wi-Fi auto start option as on, it require to restart the camera to enable Wi-Fi automatically.
Download