Gigabyte GA-EX58-UD3R (rev. 1.7) SATA2 RAID Driver 1.17.50.2
Tipo de arquivo: Driver.
Sistema operacional: Windows 2000, Windows 7, Windows Vista, Windows XP.
Nome do arquivo: motherboard_driver_sata_gb_sata2raid.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
CPU
1. Suporte para um Intel Core i7 series processor in the LGA 1366 package
2. L3 cache varies with CPU
QPI
1. 4.8GT/s / 6.4GT/s
Chipset
1. North Bridge: Intel X58 Express Chipset
2. South Bridge: Intel ICH10R
Memory
1. 4 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
2. Dual/3 channel memory architecture
3. Suporte para DDR3 2100+/1333/1066/800 MHz memory modules
Audio
1. Realtek ALC888 codec
2. High Definition Audio
3. 2/4/5.1/7.1-channel
4. Suporte para S/PDIF In/Out
5. Suporte para CD In
LAN
1. 1 x Realtek 8111C chips (10/100/1000 Mbit)
Expansion Slots
1. 2 x PCI Express x16 slots, running at x16 x16
(The PCI Express slots conform to PCI Express 2.0 standard.)
2. 1 x PCI Express x4 slot
3. 2 x PCI Express x1 slot
4. 2 x PCI slots
Storage Interface
South Bridge:
1. 6 x SATA 3Gb/s connectors (SATA2_0, SATA2_1, SATA2_2, SATA2_3, SATA2_4, SATA2_5) supporting up to 6 SATA 3Gb/s devices
2. Suporte para SATA RAID 0, RAID 1, RAID 5, and RAID 10
GIGABYTE SATA2 chip:
1. 1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2. 2x SATA 3Gb/s connectors (GSATA2_0, GSATA2_1) supporting up to 2 SATA 3Gb/s devices
3. Suporte para SATA RAID 0, RAID 1 and JBOD
iTE IT8720 chip:
1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive
IEEE 1394
1. T.I. TSB43AB23 chip
2. Up to 3 IEEE 1394a ports (1 on the back panel, 2 via the IEEE 1394a brackets connected to the internal IEEE 1394a headers)
USB
1. Integrated in the South Bridge
2. Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
1. 1 x 24-pin ATX main power connector
2. 1 x 8-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 8 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 3 x system fan headers
8. 1 x power fan header
9. 1 x North Bridge fan header
10. 1 x front panel header
11. 1 x front panel audio header
12. 1 x CD In connector
13. 1 x S/PDIF In header
14. 1 x S/PDIF Out header
15. 2 x USB 2.0/1.1 headers
16. 1 x IEEE 1394a headers
17. 1 x serial port header
18. 1 x power LED header
19. 1 x chassis intrusion header
20. 1 x clearing CMOS jumper
Back Panel Connectors
1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x coaxial S/PDIF Out connector
4. 1 x optical S/PDIF Out connector
5. 2 x IEEE 1394a port
6. 8 x USB 2.0/1.1 ports
7. 1 x RJ-45 ports
8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
1. iTE IT8720 chip
H/W Monitoring
1. System voltage detection
2. CPU/System/North Bridge temperature detection
3. CPU/System/Power fan speed detection
4. CPU overheating warning
5. CPU/System/Power fan fail warning
6. CPU/System fan speed control
BIOS
1. 2 x 16 Mbit flash
2. Use of licensed AWARD BIOS
3. Suporte para DualBIOS
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
1. Suporte para @BIOS
2. Suporte para Q-Flash
3. Suporte para Dual BIOS
4. Suporte para Download Center
5. Suporte para Xpress Install
6. Suporte para Xpress Recovery2
7. Suporte para EasyTune
8. Suporte para Dynamic Energy Saver Advanced
9. Suporte para Time Repair
10. Suporte para Q-Share
Bundle Software
1. Norton Internet Security (OEM version)
Form Factor
1. ATX Form Factor; 30.5cm x 24.4cm
É altamente recomendável usar sempre a versão de driver mais recente disponível.
Não se esqueça de verificar com nosso site o mais rápido possível para ficar atualizado sobre os drivers, softwares e jogos mais recentes.
Tente definir um ponto de restauração do sistema antes de instalar um driver de dispositivo. Isso ajudará se você instalou um driver errado. Podem surgir problemas quando o dispositivo de hardware é muito antigo ou não é mais suportado.
Download