Gigabyte GA-EP41-UD3L (rev. 3.3) Easy Tune6 Utilitário B12.0912.1 para Intel
Tipo de arquivo: Utilitário.
Sistema operacional: Windows 7, Windows 8, Windows Vista, Windows XP.
Nome do arquivo: motherboard_utility_et6_intel.exe.
Bit: 64 Bit.
Licença: Grátis.
Descrição
CPU
– Suporte para um Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/Intel Core 2 Duo processor/ Intel Pentium processor/Intel Celeronprocessor in the LGA775 package
(Go to GIGABYTE’s website for the latest CPU support list.)
– L2 cache varies with CPU
Front Side Bus
– 1333/1066/800 MHz FSB
Chipset
– North Bridge: Intel G41 Express Chipset
– South Bridge: Intel ICH7
Memory
– 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
– Dual channel memory architecture
– Suporte para DDR2 1066(OC)/800/667 MHz memory modules
(Go to GIGABYTE’s website for the latest memory support list.)
* Because of Intel chipset limitation, please use single-side memory module if four memory modules are to be installed.
Audio
– Realtek ALC888 codec
– High Definition Audio
– 2/4/5.1/7.1-channel
– Suporte para S/PDIF In/Out
– Suporte para CD In
LAN
– RTL8111C/D(L) chip (10/100/1000 Mbit)
Expansion Slots
– 1 x PCI Express x16 slot, running at x16
– 3 x PCI Express x1 slots
– 3 x PCI slots
Storage Interface
South Bridge:
– 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
– 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices
iTE IT8718 chip:
– 1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB
– Integrated in the South Bridge
– Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
Internal I/O Connectors
– 1 x 24-pin ATX main power connector
– 1 x 4-pin ATX 12V power connector
– 1 x floppy disk drive connector
– 1 x IDE connector
– 4 x SATA 3Gb/s connectors
– 1 x CPU fan header
– 2 x system fan headers
– 1 x power fan header
– 1 x front panel header
– 1 x front panel audio header
– 1 x CD In connector
– 1 x S/PDIF In header
– 1 x S/PDIF Out header
– 2 x USB 2.0/1.1 headers
– 1 x power LED header
– 1 x chassis intrusion header
– 1 x clearing CMOS jumper
Back Panel Connectors
– 1 x PS/2 keyboard port
– 1 x PS/2 mouse port
– 1 x parallel port
– 1 x coaxial S/PDIF Out connector
– 1 x optical S/PDIF Out connector
– 1 x serial port
– 4 x USB 2.0/1.1 ports
– 1 x RJ-45 port
– 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/ Side Speaker Out/Line In/Line Out/Microphone)
I/O Controller
– iTE IT8718 chip
H/W Monitoring
– System voltage detection
– CPU/System temperature detection
– CPU/System/Power fan speed detection
– CPU overheating warning
– CPU/System/Power fan fail warning
– CPU/System fan speed control
BIOS
– 2 x 8 Mbit flash
– Use of licensed AWARD BIOS
– Suporte para DualBIOS
– PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
Unique Features
– Suporte para @BIOS
– Suporte para Q-Flash
– Suporte para Virtual Dual BIOS
– Suporte para Download Center
– Suporte para Xpress Install
– Suporte para Xpress Recovery2
– Suporte para EasyTune
– Suporte para Dynamic Energy Saver Advanced
– Suporte para Time Repair
– Suporte para Q-Share
Bundle Software
– Norton Internet Security (OEM version)
Operating System
– Suporte para Microsoft Windows Vista/XP
Form Factor
– ATX Form Factor; 30.5cm x 21.0cm
Tente definir um ponto de restauração do sistema antes de instalar um driver de dispositivo. Isso ajudará se você instalou um driver errado. Podem surgir problemas quando o dispositivo de hardware é muito antigo ou não é mais suportado.
Download