Crucial MX300 SSD Firmware M0CR040
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: mx300_revM0CR040_bootable_media_update.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Version M0CR040 includes the following changes:
– Improved large block SEQ read performance on 2TB drives
– Fixed potential command timeout when Thermal Throttling is active
– Improved drive error handling
– General stability improvements
Identify the drive model and current firmware:
– Click the Start button, then click Computer.
– Right-click on the disk icon that represents your drive, then click Properties.
– Click the Hardware tab.
– The “All disk drives:” list contains a list of all physical drives in the system. Highlight the chosen drive and click Properties.
– Note: There may be multiple entries in the list, and each entry may appear as an ATA device or a SCSI device depending on the drivers installed in the system.
– Click the Details tab, click the Property drop-down list, then select Hardware Ids. A display similar to what is shown on the following page will appear.
– Note: The format of the information below may change depending on if the drive appeared as an ATA device or a SCSI device.
Installation Process:
– Download the appropriate ISO image
– Create bootable media with the ISO (CD or USB drive).
– Boot into the created media to perform the update
– Remove the bootable media and restart into the normal operating environment
Download