Canon EOS C300 Mark II PL Camera Firmware 1.0.6.1.00
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: c300mk2-v1061-win.zip.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Firmware Version 1.0.6.1.00 incorporates the following fixes and enhancements:
– Suporte para the OLED Electronic Viewfinder EVF-V70 has been added.
– Shutter Angle Priority has been added. A constant shutter angle can now be maintained, regardless of any other camera settings being changed.
– Suporte para the WFT-E8 has been added.
– Built-in Mic Audio Off. The internal microphone on the camera body can now be turned off.
– In Browser Remote, the focus guide frame can now be displayed.
– 2K Crop Audio Recording. Audio can now be recorded when the camera is set in 2K crop mode.
– Suporte para CFast cards (VPG130) has been added.
– Suporte para peripheral illumination & chromatic aberration when the EF 24-105mm f/4L IS II USM lens is attached, has been added.
– Metadata related to the XF-AVC range has been corrected. The range of Canon Log/Log2/Log3 has been corrected to full range.
– The quality of autofocus has been enhanced.
– The operation reliability after changing the recording mode has been enhanced.
Zebra Range Changes:
– Zebra Range Expanded Below 65%.
– The range of the Zebra 1 setting has been expanded to between 5% (±5%) and 95% (±5%) in steps of 5%.
– The range of the Zebra 2 setting has been expanded to between 5% and 100% in steps of 5%.
Caution:
– You cannot perform the firmware update using CFast 2.0 cards. Please use a commercially available SD/SDHC/SDXC memory card that is 64MB or more for the firmware update.
– Firmware version 1.0.4.1.00 is for updating Cinema EOS C300 Mark II cameras running firmware version 1.0.0.1.00 – 1.0.3.1.00. If your camera’s firmware is already version 1.0.4.1.00, it is not necessary to update the firmware. Once the camera is updated to the latest version, it cannot be restored to a previous version.
– For further information, please refer to the latest version of the unit’s Instruction Manual that is released with the firmware update.
IMPORTANT: Precautions for updating the firmware
– If the firmware update is not performed correctly, the camera may stop working.
– All camera settings will be reset formatted when you perform the firmware update.
– It is not possible to revert the firmware back to a previous version after you have performed the firmware update.
– Please be absolutely sure NOT to operate the camera buttons or remove the camera’s power source during the firmware update. Doing so may cause the camera to malfunction.
Instruções de instalação:
– Salve e descompacte o arquivo para download.
– Insert the SD card into the camera’s SD card slot, and close the card cover.
– Slide the Power switch to CAMERA.
– After pressing the MENU button, open the [Initialize Media] submenu.
– Select [SD Card] and then press SET.
– Select [Complete] (complete initialization) and then press SET.
– When you select [OK] and then press SET, complete initialization of the SD card will start.
– When the confirmation message appears, press SET.
– Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
– Copy the firmware update data to the SD card
– Insert the SD card prepared into the camera’s SD card slot.
– Slide the Power switch to CAMERA.
– After pressing the MENU button, open the camera firmware submenu.
– [System Setup] [Firmware] [Camera]
– The firmware update confirmation screen will be displayed.
– When you select [OK], the firmware update will start.
– After the update ends, the camera will restart automatically, and a firmware update completion screen will be displayed.
– When you select OK, all settings will be reset and the [Date/Time] screen will appear. Set the date/time.
– Check that the firmware version has changed to current one.
– Press the MENU, and slide the Power switch to OFF, and then remove the SD card from the camera.
Download