Buffalo TS5200D NAS Firmware 3.52
Tipo de arquivo: Firmware.
Sistema operacional: Windows 10, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2008, Windows Server 2012, Windows Vista, Windows XP.
Nome do arquivo: TS5000_series_FW_3.51.zip.
Bit: 64 Bit.
Licença: Grátis.
Descrição
Bug Correções:
– [SMB]: Modified to deal with a Samba programming vulnerability (CVE-2017-7494).
Before updating the firmware:
– Do not turn off the TeraStation until the firmware update is complete and the “finished” message is displayed.
– USB drives may not be mounted automatically after updating the firmware. To mount them, unplug and then reconnect them.
– Disconnect iSCSI volumes with the iSCSI Initiator before updating the firmware.
– Make sure the TeraStation’s Ethernet frame size is smaller than the hub or router’s. Larger frame sizes may not transfer the data to the TeraStation correctly.
– If an external USB drive is configured as a target for TeraStation backup, the drive should be formatted with ext3, XFS, or FAT32. Do not use an NTFS-formatted drive as a backup target or unexpected behavior may result.
– If a “Replication I33 ReplicateFailure” error occurs, navigate to ‘Backup’ – ‘Replication’ and click ‘Run Differential Backup’.
– If a “I33 ReplicateFailure” replication error occurs, navigate to ‘Backup’ – ‘Replication’ – ‘Edit Failover Status’ and click ‘Sync’.
How to Update the Firmware:
– Connect the TeraStation and a computer to run the updater on the same network subnet. The subnet masks should be the same and the first three numbers of the IP addresses should be the same. The last number of the IP addresses should be different.
– Exit all applications. Also, stop or exit any firewall software.
– Extract the downloaded file and run “TSUpdater.exe”. When a TeraStation is detected, an update window will open.
– If multiple TeraStations are connected to the network, select which TeraStation to update.
– Click ‘Update’ and enter the TeraStation’s administrator password.
– Click ‘OK’.
– It will take several minutes for the firmware to update. During the update process, the info LED will blink. Don’t disconnect or power down the TeraStation until the update is finished.
– When the update is finished, a message will be displayed.
Download