Arturia BeatStep Pro Controller Firmware 1.3.0.23
Tipo de arquivo: Firmware.
Sistema operacional: AnyOS.
Nome do arquivo: BeatStepPro-MP-1.3.0.23-20151117.led.
Bit: 32/64 Bit.
Licença: Grátis.
Descrição
Features:
– Wait to load pattern (activated in the MIDI Control Center): when Wait to load pattern is On, it waits until the end of the pattern to switch
– Chaining pattern: Up to 16 patterns can be chained for each sequencer to create longer sequences. Use SHIFT + SEQ1, SEQ2 and/or DRUM and press the step buttons in the order of your chain.
– SHIFT + KNOB : Changes are applied to all the steps of the pattern using one knob. KNOB 1 is used for RELATIVE changes and KNOB 2 for ABSOLUTE changes. Velocity, Gate and Shift can be modified this way.
– Input MIDI channels can be set using SHIFT + CHAN combination.
– BeatStep Pro stays in sync when changing the time resolution or playback direction, by calculating the new playing position.
– SHIFT + PLAY restarts the 3 sequencers, quantized to the next Drum step.
– Hold notes triggered by pads in CONTROL mode when switching to another mode.
– Gate lengths have now a minimum value regardless of the tempo. The Minimum duration of a Gate is 3 ms.
– Copy patterns between SEQ1 and SEQ2: to copy a pattern from SEQ1 to SEQ2 : set the BeatStep Pro in SEQ1 Mode, then hold SAVE + SEQ2 + STEP in this order to save
– Saving patterns feedback: A dot is displayed at the bottom of the pattern number on the sequencer’s display if the pattern is modified</li>
– BeatStep Pro shows the used patterns when saving: when pressing Save to save a pattern (SEQUENCER 1, 2 or DRUM) patterns which are not empty light up in white
– 7-segment displays blinking modification on pattern save
– The last used project will be loaded when the unit starts
Fixed Bugs
– Real-time recording improvements
– No lose synchronization when USB clock is used.
– MIDI output channels and Metronome state are now properly recalled
– no more knobs jump to 0 when turned fast
– Pads no longer lit when MIDI notes are triggered if SHIFT or DRUM or SEQ1/2 buttons are pressed
– Knob acceleration enhancement
– Looper reverse mode enhancement
– Mute mode enhancement
– Changing projects enhancements
– The Roller continues to play when touch strip is pressed before the pad
Download