ViewSonic ViewPad 10e 3G Tablet Oprogramowanie 4.0 WW
Typ pliku: Oprogramowanie.
System Operacyjny: .
Nazwa pliku: V10E_3G_WW_V4.0_20120720.rar.
Bit: 32/64 Bit.
Licencja: Darmowa.
Opis
Package description:
– Upgrades your ViewSonic ViewPad 10e 3G version to ICS (Ice Cream Sandwich)
WARNING
: DO NOT install the upgrade if the Version is incorrect. This will cause a malfunction and void the warranty. If you are unsure then do not install the update and contact technical support.
Ważna uwaga:
– All the data in the Viewpad internal memory will be erased during the upgrade
and the current software will be replaced by a new version.
– The viewscene 3d will not be included in this new update.
– Make sure you back up all your personal data into an external memory device
before starting the upgrade.
Before you start updating your Viewpad 10e to the ICS version:
– Install the Viewpad 10e drivers in your computer by putting your device into Bootload.
– Make sure your device has at least 60% battery
– It’s advisable to plug the charger (optional)
– The device needs to be powered off before starting the update
– Copy the zip folder to any place in your desktop and unzip it.
How to Upgrade:
-Step 1: Press & Hold Volume -, insert a „clip” into the reset button hole for approximately 3 seconds.
– Step 2: Press and Hold Volume – and slide power button for approximately 3 seconds.
– If done correctly the device should enter into bootload successfully and the charging led should turn off.
– Step 3: Open the MPTool folder and run the MPTool upgrade software (you might need to Right-Click/Second-Click it and select „Run as administrator” for the software to detect the device)
– Step 3.1: Connect the ViewPad 10e by micro USB cable to the Desktop/Laptop and click the scan button. The „1” button should now change to green and a ready message should appear. If not, please repeat steps 1 and 2 or view the troubleshooting slide.
– Step 3.2: Click on the erase button. Erase success message should appear.
– Step 3.3: Click download button (the download process should start automatically). The menu bar should start to change between the following different infos: UBoot > Boot Kernel > Recover Kernel > System > Data > Download Success. After that a message with „Download End!” should appear.
– Step 4: Once the download complete message appears, disconnect the device from the Desktop/Laptop. To reboot the device, insert a „pin” in the reset hole and then slide the power button.
Pobierz